//ArrowChat Code
Results 1 to 11 of 11

Thread: 250sx with 200x front end rims tire set up

  1. #1
    Join Date
    Feb 2015
    Location
    new york
    --
    86

    250sx with 200x front end rims tire set up

    can I run a bear claw tire up front with 200x front end,or is it to wide and will rub?want to run bear claws in back what are the sizes??
    Last edited by vanvranken; 12-01-2017 at 10:10 PM.

  2. #2
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,531
    The stock front tire for the 200X is a 23.5x8-11. If you can find a Bear claw in this size, it should work fine. The rears on both machines were 22x11-8 stock. If not, there has been a few people who have put a 10" rim on the front of their 250R. Maybe this could work on a 200X front end as well.

  3. #3
    Join Date
    Feb 2015
    Location
    new york
    --
    86
    having trouble locating a aluminum front rim??

  4. #4
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,531
    What size? There's several stock ones on Ebay right now.

  5. #5
    Join Date
    Feb 2015
    Location
    new york
    --
    86
    Looking for a new aluminium one .

  6. #6
    Join Date
    Feb 2017
    Location
    Corona CA
    --
    808
    Quote Originally Posted by vanvranken View Post
    Looking for a new aluminium one .
    Call Douglas rims , they sell new ones I have one both 11” and 10” for my 350x , same volt pattern offset etc as the 200x. Also check ebay there’s a guy in so cal who usually has them in stock. That’s where i bought my 11” one from.


    Sent from my iPhone using Tapatalk Pro

  7. #7
    Join Date
    Feb 2015
    Location
    new york
    --
    86
    I found the rim on ebay.listing says it fits 350x,200x,250r.i tried my 85 200x hub on a 86 250r front rim I have don't fit????

  8. #8
    Join Date
    Feb 2017
    Location
    Corona CA
    --
    808
    That’s strange. I was under the impression they were the same. I was even told the rims I had on my 350x were OEM 200x wheels, wich made sense cause they didn’t look the same and the tears were 8”.


    Sent from my iPhone using Tapatalk Pro

  9. #9
    Join Date
    Feb 2015
    Location
    new york
    --
    86
    I might have been sold the wrong front hub.not sure how to identify it????the ebay listing said came off a 85 200x.Click image for larger version. 

Name:	IMG_20171203_161254018.jpg 
Views:	32 
Size:	1.37 MB 
ID:	248098Click image for larger version. 

Name:	IMG_20171203_161308727.jpg 
Views:	35 
Size:	1.35 MB 
ID:	248099

  10. #10
    Join Date
    Feb 2017
    Location
    Corona CA
    --
    808

    250sx with 200x front end rims tire set up

    Everything I’ve read said they swap. Maybe you have the wrong hub. Idk. Measure it center of stud to center of stud then multiply by 25.4 , should be 170mm , at least that’s what I’m reading.
    So there might be a difference from 85 to 86 on the hub and wheel. I’m reading the 85 is 4 on 176 and the 86\87 is 4 on 170. Hopefully someone can verify. I don’t own either bike. Only a 350x good luck

    Sent from my iPhone using Tapatalk Pro
    Last edited by Shawn Powell; 12-03-2017 at 10:44 PM. Reason: Typed wrong. Fat fingers

  11. #11
    Join Date
    Feb 2015
    Location
    new york
    --
    86
    help anyone???

//ArrowChat Integreation Code //