Thank's, It's like sand only made of frozen water. Colder but just as much fun.Originally Posted by knappyfeet
At The Back Of The Pack
Arm chair racerFirst time rider
Thank's, It's like sand only made of frozen water. Colder but just as much fun.
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
Power User
The day begins with 3WW
Nice work!
Sent from my Z958 using Tapatalk
At The Back Of The Pack
Arm chair racerFirst time rider
Thank you. I am going to revisit Red Rider's concern about the weld looking thin.
Im going to lay another bead with a mig and leave it unground. The skid plate should cover most of it.
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
Power User
Roostin Away
Remember not to make it too “nice” or you wont want to get it dirty. Looking good just lay another bead on there it’ll be easier now. Nevermind u are
Shep
At The Back Of The Pack
Arm chair racerFirst time rider
Yeah, that first scratch is always a heartbreaker.
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
At The Back Of The Pack
Arm chair racerAt the back of the pack
Too bad you're so far, I've got a nice frame sitting here.
"Still occupied with 1985"
200X- restored to near original and SOLD
350X- back in black
250R- she purdy...
At The Back Of The Pack
Arm chair racerFirst time rider
Yeah, you guys in California run across some nice parts.
I believe this frame will do for me, it's pretty good in all other respects.
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
At The Back Of The Pack
Arm chair racerFirst time rider
Well it seems I have an unmolested stator side but are the poles on the bottom fried or just covered?
They appear to be wrapped in something.
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
Power User
Roostin Away
There just sealed, why i couldn’t tell you. Maybe from moisture? Heat? I have no idea
Like this one
Shep
At The Back Of The Pack
Arm chair racerFirst time rider
Exactly! Great Shep, I'll keep trucking with this one.
I was just wondering because in my experience copper is good , black is bad.
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
Got The Holeshot
Arm chair racerJust too addicted
The black and copper poles are two different circuits. I'm thinking the black is the ignition circuit and copper is lighting. Keep up the good work.
Sent from my iPhone using Tapatalk
At The Back Of The Pack
Arm chair racerFirst time rider
Ok, that would explain the two connectors leading out. Thanks.The black and copper poles are two different circuits. I'm thinking the black is the ignition circuit and copper is lighting. Keep up the good work.
Sent from my iPhone using Tapatalk
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
At The Back Of The Pack
Arm chair racerFirst time rider
I think I'm happy with the re-weld. That makes three things I found I'm delusional into thinking I can do.
Body work, drywall finishing and grinding weld. I just don't know when to stop until I go too far
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
At The Back Of The Pack
Arm chair racerAt the back of the pack
Yep, took me forever when to learn when I had took enough off. Lol
I think I'm happy with the re-weld. That makes three things I found I'm delusional into thinking I can do.
Body work, drywall finishing and grinding weld. I just don't know when to stop until I go too far
Sent from my XT1254 using Tapatalk
At The Back Of The Pack
Arm chair racerFirst time rider
I found some tank shrouds that were in very rough shape. They came from two different machines. One was painted twice and the other was baked by the sun.
I decided to try to save them and some money. So I tested my body work skills and came up with this so far.
This is the first sanding and it's convinced me that these are salvageable for a rider. Next is a finish sanding and polish. Then the headlight which came on the machine but is just as rough.
Man are they baked.
This is a picture of the frame so far.
I'll finish it up in warmer weather.
Alan
1985 350x
1984 200es Big Red
1985 200s (little red)
1986 200x saga
2) 1985 350x projects
And a slew of others to hold my attention
Reply With Quote
