Ok so same width definitely. So you guys mostly just used recycled axles and hubs kinda thing off old junk trailers?
New to the board
Arm chair racerNew to the board
Ok so same width definitely. So you guys mostly just used recycled axles and hubs kinda thing off old junk trailers?
At The Back Of The Pack
Arm chair racerFirst time rider
You can buy brand new if you want just so happened that an old trailer that was rotted out had good torsion axles so it was one less thing I had to buy and the work great. Even pull people around and they say it's not bumpy at all.
New to the board
Arm chair racerNew to the board
Ok I think my uncle has an old trailer I am most likely going to take to class and rip apart to take the axle from I just need to figure out what kind of body to put on the trailer if it should just be box like or maybe if it should tilt im not totally sure on all that stuff yet.
Just Too Addicted
Arm chair racerJust too addicted
Here is one I built for my garden tractor. Still gotta put some sides on it.
http://www.mytractorforum.com/119-ho...y-trailer.html
1984 HONDA ATC200M - OG, mid-restoration
1981 HONDA ATC200 - future build
1981 HONDA ATC185S - parts
1984 ATC200X - roller, future build
1984 Honda ATC250r - in a million pieces- ISO grab bar, PM if you have one
Da velder
_______________________________________________
Feedback:
http://www.3wheelerworld.com/showthr...ck-for-Barnboy
New to the board
Arm chair racerNew to the board
So plans have changed again. I am buying a 4 foot axle that will be a bit over rated but it might get used fo something else, with leaf springs and a dumping bed that will overhang the wheels and be 4 feet wide by a little over 2 tall, I drew up some plans and the teacher likes them so i will be good to go. Just need materials now.
Reply With Quote