//ArrowChat Code
Results 1 to 3 of 3

Thread: Hello...and some help, please!

  1. 03-14-2018, 11:47 AM #1
    Red 83
    Red 83 is offline Registered User New to the board
    Join Date
    Mar 2018
    Location
    Southeast Texas
    --
    2

    Talking Hello...and some help, please!

    New member...first post. So I'm in the middle of a top end rebuild on our '83 110, and I've come across conflicting info for the valve stem seal. I have the '81-'84 Honda service manual, and for the valve reassembly, it shows the lone valve stem seal going on the intake valve. However, I've read on some forums that it should actually go on the exhaust valve because of the way the motor sits...the exhaust valve is down and would be more prone to oil blow-by. Can someone confirm where the steam seal actually goes...from experience of putting the valves back together? TIA
    Reply With Quote Reply With Quote
  2. 03-14-2018, 02:55 PM #2
    DAM shop's Avatar
    DAM shop
    DAM shop is offline Roostin' Away Arm chair racerRoostin Away
    Join Date
    Nov 2015
    Location
    Davenport iowa
    --
    1,144
    Welcome,
    The seal goes on the exhaust valve.
    Reply With Quote Reply With Quote
  3. 03-14-2018, 09:10 PM #3
    Red 83
    Red 83 is offline Registered User New to the board
    Join Date
    Mar 2018
    Location
    Southeast Texas
    --
    2
    Quote Originally Posted by DAM shop View Post
    Welcome,
    The seal goes on the exhaust valve.
    Thanks...appreciate the confirmation.
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //