I know this has been covered before and I have searched and read every thread I can find and found no answer to my question.
The manual indicates there should be about 1mm of 'free play' in the lever on the head at TDC. Even with the cable unhooked, I can not feel any free play anywhere in the entire range of motion of the arm. Is the free play supposed to be at the exact spot the arm stops moving down from the tension of the spring?
I took a video and if someone can tell me what the time in the vid is the point there is supposed to be 'free play' I would be grateful
https://youtu.be/4qGm-u2fmBE