Has anyone ever tried this on a plastic tank or should I just buy a new tank for my 250sx?
https://www.tapplastics.com/product/fiberglass/gel_coat
Has anyone ever tried this on a plastic tank or should I just buy a new tank for my 250sx?
https://www.tapplastics.com/product/fiberglass/gel_coat
Last edited by chriswhit123; 05-01-2018 at 03:13 PM. Reason: adding a pic
I would get another tank. I'm not sure how well it would hold.
It would be preferable to use an epoxy resin vs. a polyester resin on PPO/TPO/etc style plastics.......and if memory serves......you need to spray a releasing agent on top of the gel coat for it to be shiny.
I'm with schlepp.......perhaps purchase a new tank
Why the thoughts on a gel coat?
You could probably sand and buff that to look decent you know. I don't know how nice you're looking to make your bike but if that doesn't leak I'd just clean it up and run it.
85 Tri-Zinger 60
85 ATC250SX
86 ATC250SX
87 ATC250SX
02 XR650L conversion
84 ATC 480R
An upholstery shop might be able to make a tank cover out of vinyl?
Last time I looked, Ceet only had 250R and 350X tank covers available.
I had one on my 350X when I first bought it (not sure if it was Ceet or Answer) but over the years it finally started coming loose at some of the seams. I cut the threads along the seams so I could keep a pattern and cut and sew one out of new vinyl. Of course, mom & dad having an upholstery shop made things a little more accessible for me.