//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Page 2 of 2 FirstFirst 1 2
Results 16 to 24 of 24

Thread: 1986/87 Honda 200x headlight “shells”

  1. #16
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    686
    Trike-crazy I can find out about shipping today will pm you. I sent one to Ohio it was $11 just to give u an estimate

    Eric250r- I’ve got 3 made up —- white
    1 is for trikecrazy if he buys it
    1 is on eBay (wife is selling) if it doesn’t sell i’ll Bring it to trikefest
    1 other is making the trip to Indiana also


    Eric250r— i can show u one in person (will hold on to it until then)
    Trikecrazy that goes for you also if your heading to trikefest


    Aiming to leave here (ma) Tuesday night
    I’m sure we’re going unless something major happens, but looking good so far

    Shep
    Last edited by Shep1970; 06-14-2018 at 10:27 AM.

  2. #17
    Join Date
    Feb 2013
    Location
    Brazil, Indiana
    --
    632
    I'll be there. I can just bring cash if that's fine

    Sent from my SM-G965U using Tapatalk
    1979 ATC110
    1983 ATC110
    1984 ATC110
    1984 ATC125M
    1985 ATC110 2 of them
    1985 ATC110 The wife's
    1987 ATC125M
    1985 ATC250ES
    1984 DX225 with 250 timberwolf engine and swingarm. Wolf in DX clothing

  3. #18
    Join Date
    Mar 2016
    Location
    Kansas City, MO
    --
    119
    That white one came out nice Shep. Wish I was going to Trikefest, just don't have the time right now.
    Real men ride trikes!

  4. #19
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    686
    Thanks Kevin, I had it in my mind three days ago that we weren’t going (too much to do) this yr but I said that to Jaime (wife) she was a bit upset......she pushed we are going cuz it’s a Father’s Day thing and the 16th is our anniversary so yup she won. Now I gotta put extra long days in to be ready. It’ll be worth it, just wish I was already there. Have to get me some biscuits and gravy from haspin snack bar “yummy”

    Shep
    Last edited by Shep1970; 06-14-2018 at 05:06 PM. Reason: Oh just some spelling

  5. #20
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    686
    Last Friday’s- 12hour run, well about 20mins prep/pour with about 1-1/2 hr demold time (each). I wanted to try a clear one but ran out of mix/ until next batch. I added a couple more vents in the mold to realease trapped air, only one has a very small void on an edge. Two or three of these will be for sale on this site(when done). The wife’s putting one on eBay, others are already sold to good folks on 3ww. Now I have to drill them.
    Click image for larger version. 

Name:	CCD3775D-6570-4FD3-9DAD-640F8046FBFB.jpeg 
Views:	14 
Size:	2.27 MB 
ID:	254700 Click image for larger version. 

Name:	ABDBABF6-C8A5-4FE8-8BD9-62B9762454D1.jpeg 
Views:	21 
Size:	1.99 MB 
ID:	254701 Click image for larger version. 

Name:	2904E1B5-3CA3-4CD2-9811-6F9793B5AF59.jpeg 
Views:	12 
Size:	1.61 MB 
ID:	254702

    Thanks for looking
    One of the shells sales will be donated to swineharts wife’s account (if that’s ok) I know that info is on 3ww
    Shep
    Last edited by Shep1970; 09-23-2018 at 09:54 AM.

  6. #21
    Join Date
    May 2006
    Location
    Bowling Green KY
    --
    3,591
    Nice work

    Sent from my Z958 using Tapatalk

  7. #22
    Join Date
    Jan 2009
    Location
    Louisiana
    --
    126
    I would like a red one. I will send a pm for payment info.

    Great Work!

  8. #23
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    686
    I know there’s a atleast two shells out there that weren’t prepped/drilled by me, I just wanted to post the tools I use to help those two shells-

    15/64 drill bit for pins
    3/8 for glass mounting (two rear of glass)
    7/16 for outer hole
    A dremel cutter bit about 3/8 round cutter end

    Drill holes/ I start with a power drill (low speed) and finish by twisting bit by hand cuts fast w/sharp bit
    Outer hole 7/16 bit doesn’t go all the way through (leave about 1/8 plastic so pins lock in)
    15/64 I start with this- drill straight through carefully (pin shaft size)

    The dremel bit I lock it at bottom of 7/16 cut/spin around hole (shaft won’t let it cut deeper than needed)
    Reset dremel saw in thickness of blade/push into tool so now u have a wider groove for rubber strap piece that pushes in

    Hope this helps and makes sense.....
    I won’t sell anymore without prepping first, it’s not easy. But doable
    Click image for larger version. 

Name:	A0CB0CED-4129-41D3-8186-2BCA5CCA1FF8.jpeg 
Views:	13 
Size:	607.0 KB 
ID:	254794 Click image for larger version. 

Name:	FF576E29-3199-4095-AB14-42E08D8E7892.jpeg 
Views:	13 
Size:	1.43 MB 
ID:	254795 Click image for larger version. 

Name:	3685C7B1-20F7-40F3-B847-538C2E2238A1.jpeg 
Views:	12 
Size:	2.30 MB 
ID:	254796 Click image for larger version. 

Name:	A944F5AA-8DA9-4881-BEE5-ED2639E30A1C.jpg 
Views:	14 
Size:	50.5 KB 
ID:	254797

    Shep
    Shipping 2 tomorrow and 2 Saturday so I’ll be in touch if we’ve spoken. Thanks
    Last edited by Shep1970; 09-26-2018 at 05:41 PM.

  9. #24
    Join Date
    Mar 2016
    Location
    Kansas City, MO
    --
    119
    Ah man, I just saw this. Dang it...lol. I need a red one.
    Real men ride trikes!

//ArrowChat Integreation Code //