//ArrowChat Code
Results 1 to 4 of 4

Thread: 1985 200x misfire

  1. #1
    Join Date
    Jan 2010
    Location
    Nicholson, Pennsylvania, United States
    --
    1,641

    1985 200x misfire

    I have a misfire not able to diagnose on my 85 200x.All the simple stuff is correct.Wondering if it is a ignition issue.Tried different coil and cdi.Wondering if it could be the pulse generator,stator,rotor?

  2. #2
    Join Date
    May 2006
    Location
    The Open Road
    --
    4,729
    Quote Originally Posted by jays375 View Post
    I have a misfire not able to diagnose on my 85 200x.All the simple stuff is correct.Wondering if it is a ignition issue.Tried different coil and cdi.Wondering if it could be the pulse generator,stator,rotor?
    I had trouble with mine once and got up in the pulse generator housing and cleaned out all the rust dust and rust off the pickup and rotor metal and that fixed my problem. It was pretty bad in there though.

    You might try that

    No loose ground wires?

    Sent from my Z958 using Tapatalk

  3. #3
    Join Date
    Jan 2010
    Location
    Nicholson, Pennsylvania, United States
    --
    1,641
    All clean unfortunatley.Grounds are good.Bike is a new build and hasn't been run much.Ran fine until recently.

  4. #4
    Join Date
    Dec 2021
    Location
    Qc
    --
    5
    I know it’s been awhile but did you ever find out what it was? i have a similar issue! Thanks!


    Sent from my iPhone using Tapatalk

//ArrowChat Integreation Code //