At The Back Of The Pack
Arm chair racerAt the back of the pack
I need to pull the engine from my Big Red. Can I pull it without removing ( or at least backing off) the swingarm? I am wondering if there is room to remove the mounts and clear the driveshaft? Or is it better to remove the strange swinger bolts and get a little more room. Any help from someone who has done it is appreciated.
At The Back Of The Pack
Arm chair racerFirst time rider
You can get it out without removing the swingarm yes, when I replaced my drive shaft boot, the strange swing arm bolts did not want to budge so I removed the engine to fit it ....
1983 Honda ATC250R
1983 Honda ATC200E BIG RED (sold)
1984 Honda ATC200E BIG RED
1984 Honda ATC200X (sold)
1985 Honda ATC70 x 2
1985 Honda ATC250ES BIG RED
1988 Honda ATC250ES BIG RED
1995 Honda Frankentrike 50cc 2-stroke
2001 Honda TRX90
2004 Honda TRX300EX (sold)
2008 Honda TRX250TM
1976 Suzuki RV90M (sold)
1967 Vespa Primavera 125
1958 Massey Ferguson 35
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks for the info.
At The Back Of The Pack
Arm chair racerAt the back of the pack
So a quick update....after some patience and finesse I was able to get the old engine out and new one in. Big red is running great and I am pleased.
Last edited by gimmeamidget; 06-15-2018 at 02:57 PM.
Reply With Quote