//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 3 of 3

Thread: Upgrade assistance

  1. #1
    Join Date
    Jun 2018
    Location
    Portland oregon
    --
    2

    Upgrade assistance

    How's it going everybody Robert here new registrant but this site has been helping me out for the past couple months do a rebuild on an 84 Honda ATC70 instead of waiting to get time to rebuild the motor I did that 125 Lifan swap but I'm having issues with the muffler it seems that when I bolt the muffler to the engine there's about an inch and a half of space with a lot of free play I've seen other post about people having to heat with torch to get it to bolt to frame but nothing about the way it fits on the motor any help would be greatly appreciated thank you

  2. #2
    Join Date
    Jun 2018
    Location
    Portland oregon
    --
    2
    And when I say free play it's between the pipe and the motor the connection is securely fastened and when it is completely bolted down I can lift the pipe up into the motor about an inch and a half

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    5,521
    If your using the stock 70 exhaust then you will need the two factory spacers .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //