//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 2 of 2

Thread: '85 200S Idles then dies

  1. #1
    Join Date
    Sep 2017
    Location
    Illinois
    --
    14

    Question '85 200S Idles then dies

    Put a stock carburetor back on the trike and it fires up good and will idle but then the idle will start slow down and the engine will kinda pop and make a "sucking air" kind of sound and die. Timing was good at the rpm of about 1500, I haven't played with the pilot screw at all. I feel like I've lost some RPM's at the top end as well.

    Any suggestions as what to check next? I keep thinking I just can't find a good carburetor to put on it and get it adjusted good.........bought a $25 Chinese one on Ebay and it was running great until a couple weeks ago....

    New spark plug (properly gapped), timing is good, gap at pulse generator is good, fresh fuel, new petcock. I'm using really small black fuel tubing (same that goes from the drain on the carb) - could that be the issue?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Fuel Line.jpg 
Views:	5 
Size:	412.8 KB 
ID:	252823  
    Last edited by rideus74; 06-07-2018 at 08:14 PM.

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    5,521
    Adjust your air fuel screw after the motor is warm for the best idle , thatís what
    Itís for . Also make sure your pulser timing is set perfect .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //