//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 10 of 10

Thread: Stud bolts for 84 250r help?

  1. #1
    Join Date
    Apr 2014
    Location
    Australia
    --
    490

    Stud bolts for 84 250r help?

    Hey guys my 84 250r has had normal hex bolt and nuts for the rear wheels from the previous owner and just realised once I changed the tires over! Pain in the ass to take off. I want to buy a set and wondering if the 85 or 86 studs would fit straight onto the 84? I have the standard oem 84 rims. Below is a pic from eBay, but I hope my splines arenít damaged now. Any help or advice would be good. Thanks Ivan



    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Apr 2014
    Location
    Australia
    --
    490
    Or what hub would replace it if it damaged might be cheaper


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    633
    Just get some new hubs, many different hubs fit your axle.
    83-85 200x
    86-87 200x about 1-3/4 longer than 83-85 200x over all length
    300ex
    400ex
    86/87 trx200sx about the same width as 83-85 200x
    250x
    A few others too......

    I run aftermarket trx200sx alum hubs on this 83/84 250r axle, from outside of hub to out of other its 33-1/2 long.
    If I put 86/87 200x hubs on it would be about 35-1/2 long out to outside of hub
    Click image for larger version. 

Name:	DA650179-4F12-4D92-A4A3-700AB9267FD1.jpeg 
Views:	6 
Size:	2.03 MB 
ID:	253812

    I don’t think it’d be worth messing with replacing studs (just get new) you won’t be throwing tools around the shop this way
    Keep your 2- castle nuts for 250r axle though- odd size if I remember correctly
    Shep
    Last edited by Shep1970; 07-31-2018 at 08:34 AM.

  4. #4
    Join Date
    Apr 2014
    Location
    Australia
    --
    490
    Thanks shep Iíll look into it! Which hub do you think is the best?


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Apr 2014
    Location
    Australia
    --
    490
    Quote Originally Posted by Shep1970 View Post
    Just get some new hubs, many different hubs fit your axle.
    83-85 200x
    86-87 200x about 1-3/4 longer than 83-85 200x
    300ex
    400ex
    86/87 trx200sx about the same width as 83-85 200x
    250x
    A few others too......

    I run aftermarket trx200sx alum hubs on this 83/84 250r axle, from outside of hub to out of other its 33-1/2 long.
    If I put 86/87 200x hubs on it would be about 35-1/2 long out to outside of hub
    Click image for larger version. 

Name:	DA650179-4F12-4D92-A4A3-700AB9267FD1.jpeg 
Views:	6 
Size:	2.03 MB 
ID:	253812

    I donít think itíd be worth messing with replacing studs (just get new) you wonít be throwing tools around the shop this way

    Shep

    Shep so these will definitely fit?



    Sent from my iPhone using Tapatalk

  6. #6
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    633
    Think I pd about -80 - 100 for the set I have, the trx ones u may find them cheaper? Make sure whatever u get come w/studs pressed in. Heading to work

    Shep

  7. #7
    Join Date
    Apr 2014
    Location
    Australia
    --
    490
    Thanks shep appreciate the advice


    Sent from my iPhone using Tapatalk

  8. #8
    Join Date
    Jul 2009
    Location
    South Florida
    --
    5,570
    All years 300ex or 400ex hubs are plentiful and cheap on eBay and will give you about 1 3/4” extra width which is a plus .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  9. #9
    Join Date
    Apr 2014
    Location
    Australia
    --
    490
    Quote Originally Posted by shortline10 View Post
    All years 300ex or 400ex hubs are plentiful and cheap on eBay and will give you about 1 3/4Ē extra width which is a plus .
    Thanks short line! Iíll buy 300ex or 400ex then


    Sent from my iPhone using Tapatalk

  10. #10
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    633
    Here’s my old email- pd 49x2. So $100
    Email pic is long gone, but yes they fit axle splines perfectly
    Click image for larger version. 

Name:	45DB32BD-F656-4BC1-A1AD-3320C68AAC8E.jpg 
Views:	5 
Size:	81.3 KB 
ID:	253813

    Shep

//ArrowChat Integreation Code //