//ArrowChat Code
Results 1 to 11 of 11

Thread: Anyone interested in hand built Yt60 performance pipes

  1. #1
    Join Date
    Aug 2018
    Location
    NC
    --
    4

    Anyone interested in hand built Yt60 performance pipes

    Hey guys just wanted to share an opportunity with all my fellow yt60 riders in search of more power. After finally giving up the hunt for a DG or FMF pipe I decided to fabricate my own expansion chamber. 3 prototypes later I have a pipe that makes a rather large bump in torque from 1/4 throttle all the way to the top end of the Rev range. I weigh in at just over 170 and I can sit in the center of the seat and with no assistance from a 1/4 throttle roll the little bike will lift the front tire almost to the 2 o'clock position. I have no Dyno sheets but seat of the pants testing I have noticed a large improvement throughout the Rev range and on the plus side no more carbon blocked canister. If interested please pm me. Pipe costs $80 in 22ga mild steel with no silencer. Silencer can be built for additional cost as well as the pipe can be built out of thicker steel for additional cost.

  2. #2
    Join Date
    Jan 2009
    Location
    ohio
    --
    1,750
    Pics would help with sales
    If its on the internet its got to be true they can't put any lie's on the internet

  3. #3
    Join Date
    Aug 2018
    Location
    NC
    --
    4
    I'm currently trying to figure out how to post pics

  4. #4
    Join Date
    Jan 2019
    Location
    Milan IN
    --
    1
    Please post pics of your pipe

  5. #5
    fabiodriven's Avatar
    fabiodriven is offline Aspiring romance novel cover model, and the Official 3WW slayer of thieves and swindlers. Catch me if you can
    Join Date
    Jun 2008
    Location
    The woods
    --
    10,515
    Yes I'd be interested! Let's see it!
    85 Tri-Zinger 60
    85 ATC250SX
    86 ATC250SX
    87 ATC250SX
    02 XR650L conversion
    84 ATC 480R

  6. #6
    Join Date
    Nov 2015
    Location
    Davenport iowa
    --
    1,144
    We don't have a Yt 60, but sure do like this type of tuning, trial and error and shop time. I can't think of a better way to spend a evening than testing and tuning carbs, cams and exhaust.
    90 nickolson Bored and Stroked "The Good"

    Big Bore 110 Pauter frame "The Bad"

    90 Bored and Stroked “vey’s frame” "The Ugly"

    110 JSC frame Bored and Stroked
    flat track build. “Shop trike”

    1974 original 90 X 2

    1974 Original 70.

  7. #7
    Join Date
    Nov 2015
    Location
    Davenport iowa
    --
    1,144
    90 nickolson Bored and Stroked "The Good"

    Big Bore 110 Pauter frame "The Bad"

    90 Bored and Stroked “vey’s frame” "The Ugly"

    110 JSC frame Bored and Stroked
    flat track build. “Shop trike”

    1974 original 90 X 2

    1974 Original 70.

  8. #8
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    DG still makes a great performance pipe for the yt60 . I know it’s posted for a 4 zinger but it’s the same pipe . I purchased one of these about a year ago and it was a huge performance upgrade .
    https://www.ebay.com/itm/DG-Performa...AAAOSwRrlcFBdW
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  9. #9
    fabiodriven's Avatar
    fabiodriven is offline Aspiring romance novel cover model, and the Official 3WW slayer of thieves and swindlers. Catch me if you can
    Join Date
    Jun 2008
    Location
    The woods
    --
    10,515
    I didn't know that shortline, thanks!
    85 Tri-Zinger 60
    85 ATC250SX
    86 ATC250SX
    87 ATC250SX
    02 XR650L conversion
    84 ATC 480R

  10. #10
    Join Date
    Oct 2018
    Location
    Arroyo Grande
    --
    16
    Did you ever get anywhere with this?

    Quote Originally Posted by Version One View Post
    Hey guys just wanted to share an opportunity with all my fellow yt60 riders in search of more power. After finally giving up the hunt for a DG or FMF pipe I decided to fabricate my own expansion chamber. 3 prototypes later I have a pipe that makes a rather large bump in torque from 1/4 throttle all the way to the top end of the Rev range. I weigh in at just over 170 and I can sit in the center of the seat and with no assistance from a 1/4 throttle roll the little bike will lift the front tire almost to the 2 o'clock position. I have no Dyno sheets but seat of the pants testing I have noticed a large improvement throughout the Rev range and on the plus side no more carbon blocked canister. If interested please pm me. Pipe costs $80 in 22ga mild steel with no silencer. Silencer can be built for additional cost as well as the pipe can be built out of thicker steel for additional cost.

  11. #11
    gaby is offline New to the board Arm chair racerNew to the board
    Join Date
    Aug 2013
    Location
    gatineau
    --
    15
    Do you still make the pipe?

//ArrowChat Integreation Code //