//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 3 of 3

Thread: Anyone interested in hand built Yt60 performance pipes

  1. #1
    Join Date
    Aug 2018
    Location
    NC
    --
    4

    Anyone interested in hand built Yt60 performance pipes

    Hey guys just wanted to share an opportunity with all my fellow yt60 riders in search of more power. After finally giving up the hunt for a DG or FMF pipe I decided to fabricate my own expansion chamber. 3 prototypes later I have a pipe that makes a rather large bump in torque from 1/4 throttle all the way to the top end of the Rev range. I weigh in at just over 170 and I can sit in the center of the seat and with no assistance from a 1/4 throttle roll the little bike will lift the front tire almost to the 2 o'clock position. I have no Dyno sheets but seat of the pants testing I have noticed a large improvement throughout the Rev range and on the plus side no more carbon blocked canister. If interested please pm me. Pipe costs $80 in 22ga mild steel with no silencer. Silencer can be built for additional cost as well as the pipe can be built out of thicker steel for additional cost.

  2. #2
    Join Date
    Jan 2009
    Location
    ohio
    --
    1,426
    Pics would help with sales
    If its on the internet its got to be true they can't put any lie's on the internet

  3. #3
    Join Date
    Aug 2018
    Location
    NC
    --
    4
    I'm currently trying to figure out how to post pics

//ArrowChat Integreation Code //