Picked up an 83 185s for cheap, got it running and the left case gasket is leaking when oil gets hot. How hard is it to replace?
Picked up an 83 185s for cheap, got it running and the left case gasket is leaking when oil gets hot. How hard is it to replace?
Pic of area
It’s a large O-ring on that case and you should replace the crank seal while your at it . You will need a flywheel puller , fairly easy job .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Thank you. With your help i could finally see it on the diagram. I was looking for a gasket