//ArrowChat Code
Results 1 to 3 of 3

Thread: Its a torture to work on the carb... -Just ranting..

  1. #1
    Join Date
    Sep 2018
    Location
    Calgary,AB. Canada
    --
    25

    Angry Its a torture to work on the carb... -Just ranting..

    Just a rant.. cause my fingers hurt, my back hurt, I banged my head like 5 times with the handlebar (yes I'm that smart), etc..

    I have worked on motorcycles and small motors like lawnmowers, etc.. But I have never found a machine that is harder to work than my new (to me) 200M... Holy smokes.. its a torture to get the carb out and double torture to get it back in.
    Maybe there is a secret.. I know I have much to learn but I already feel sorry for the mechanics that had to work on these things every single day..

    I had to remove both fenders, gas tank, seat and airbox.. then to put back the carb was a test of my patience.. Of course nobody had told me how or I didn't know what to expect..


    Anyway, its all done.. I needed to vent..

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Take it out with the intake manifold attached and it’s not that hard to remove .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,531
    I'll bet that it was easier to do when the rubber wasn't 30+ years old and still flexible too.

//ArrowChat Integreation Code //