//ArrowChat Code
Results 1 to 9 of 9

Thread: YFZ - Banshee Drive Hub Interchangeability

  1. #1
    Join Date
    Apr 2011
    Location
    Mexico
    --
    9,003

    YFZ - Banshee Drive Hub Interchangeability

    Does anyone know if the splines on the sprocket hub of a YFZ450 are the same as those on a Banshee axle? I know nothing else is the same on the two hubs, I just need to know if the YFZ hub fits the Banshee splines.

    Thank you
    It sucks to get old

  2. #2
    Join Date
    Mar 2010
    Location
    Slidell, LA
    --
    4,737
    Yes they should be interchangeable. I believe they are all 24 spline.
    Feedback for yaegerb: Click Here

    Need something blasted or polished or both? Send me a PM

  3. #3
    Join Date
    Jul 2005
    Location
    Manheim, PA
    --
    5,742
    Just buy a banshee one, plenty out there, warrior and blaster are the same too last i knew. Bolt up a sprocket quard and go about your day.

  4. #4
    Join Date
    Apr 2011
    Location
    Mexico
    --
    9,003
    Quote Originally Posted by oldskool83 View Post
    Just buy a banshee one, plenty out there, warrior and blaster are the same too last i knew. Bolt up a sprocket quard and go about your day.
    Thanks. I already have a Banshee hub. I need to either modify it or replace it to suit my project.
    It sucks to get old

  5. #5
    Join Date
    Aug 2008
    Location
    devore,ca
    --
    1,015
    There is some differences in the YFZ axle components depending on year model. It started changing in 2009/2010. I believe the drive hub splines and / or diameter was one of them.
    YAMAHA 450 HYBRID
    85 350X- RED
    85 350x -BLACK
    86 350x-WHITE (with Goki)
    85 250r
    83 atc 70
    84 atc 70
    84 atc 110
    09 yfz 450
    2006 Arctic Cat Prowler
    RZR XP 900

  6. #6
    Join Date
    Apr 2011
    Location
    Mexico
    --
    9,003
    I had .200” milled off the Banshee hub. That should be good enough.

    9D6EDCF1-D70E-4547-ACAE-398096D9AC02.jpeg
    It sucks to get old

  7. #7
    Join Date
    Jul 2005
    Location
    Manheim, PA
    --
    5,742
    Make your own sprocket guard for that ting off something on ebay for a TRX450R...you will enjoy it.

  8. #8
    Join Date
    Apr 2011
    Location
    Mexico
    --
    9,003
    Quote Originally Posted by oldskool83 View Post
    Make your own sprocket guard for that ting off something on ebay for a TRX450R...you will enjoy it.
    One of those round plastic discs? Been meaning to look into those.
    It sucks to get old

  9. #9
    Join Date
    Jul 2005
    Location
    Manheim, PA
    --
    5,742
    no an aluminum one. I drill new holes from what i had a 200x and put on my raptor 660 which uses came hub as banshee.

//ArrowChat Integreation Code //