Does anyone know if the splines on the sprocket hub of a YFZ450 are the same as those on a Banshee axle? I know nothing else is the same on the two hubs, I just need to know if the YFZ hub fits the Banshee splines.
Thank you
Does anyone know if the splines on the sprocket hub of a YFZ450 are the same as those on a Banshee axle? I know nothing else is the same on the two hubs, I just need to know if the YFZ hub fits the Banshee splines.
Thank you
It sucks to get old
Yes they should be interchangeable. I believe they are all 24 spline.
Just buy a banshee one, plenty out there, warrior and blaster are the same too last i knew. Bolt up a sprocket quard and go about your day.
There is some differences in the YFZ axle components depending on year model. It started changing in 2009/2010. I believe the drive hub splines and / or diameter was one of them.
YAMAHA 450 HYBRID
85 350X- RED
85 350x -BLACK
86 350x-WHITE (with Goki)
85 250r
83 atc 70
84 atc 70
84 atc 110
09 yfz 450
2006 Arctic Cat Prowler
RZR XP 900
I had .200” milled off the Banshee hub. That should be good enough.
9D6EDCF1-D70E-4547-ACAE-398096D9AC02.jpeg
It sucks to get old
Make your own sprocket guard for that ting off something on ebay for a TRX450R...you will enjoy it.
no an aluminum one. I drill new holes from what i had a 200x and put on my raptor 660 which uses came hub as banshee.