//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 3 of 3

Thread: Pulse generator

  1. #1
    Join Date
    Oct 2018
    Location
    Ohio
    --
    2

    Pulse generator

    Hey guys new to the forum, I recently bought a 1984 atc 200s. An I noticed that the base of the pulse generator has a broke off bolt in it. My question is if I buy another pulse generator base an take the old off will I throw anything out of time? or have to watch what I do taking it apart an putting it together? Thanks

  2. #2
    Gabriel's Avatar
    Gabriel is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jul 2018
    Location
    TN
    --
    187
    Setting the timing ain't hard. It can get aggravating sometimes because you have to stop, open the cover, adjust, reassemble ....repeat.
    BUT, it ain't hard.
    Use a white grease pencil to color in the 'T' on the flywheel. Makes it show up much better if you have shet eyes like me.
    I hook my timing light up to an old car battery and clip to the plug wire. Works great on my 200s.

    Once you get the timing right, don't forget to go back and set the gap between the rotor and pick up.
    Amateur Resurrectionist

  3. #3
    Join Date
    Oct 2018
    Location
    Ohio
    --
    2
    The spark advancer should be the only thing I have to take off to get that base off right? If I put it back on same way it came off would it be ok?

//ArrowChat Integreation Code //