I'm looking to assemble a DC power kit similar to the one shown in the 1982 ATC200 wire diagram. I need some help though because I don't have access to the target machines this would be for.
I'm waiting on specs from my china supplier on the regulators I picked out, but hopefully one of them is 200w+ max load to be a universal fit across machines.
Anyway, I need a measurement from the engine connectors to the nearest mounting location for a regulator (single bolt). One that has plenty of extra threads for ~1/4in would be nice. I kind of hate to get the zip tie route, but it can be an option too. Here's the machines I need the measurement on.
80-83 ATC185S/185/200
84-86 ATC200S
Might be able to make a kit for these machines too, so nearest mounting location would be great to know.
ATC70 (for use with an upgraded alternator/stator)
ATC90/110
83-85 ATC200X
85-86 ATC250R
I personally own these machines, but I'll list them so you know what machines I'm targeting (basically any that doesn't have DC power factory).
ATC350X
81-84 ATC250R
I think that covers all the machines. Of course each one has limitations on power output and such, I'll include that info in the listings when I build the kit. Anyway, I'm open to discussion on this topic. Basically this kit would allow an LED headlight/taillight to be used on machines that generate AC power. I might make a second kit like a LED light kit or something to include headlight/taillight pig tails with the DC power kit. Not 100% sure how I'll package everything to keep it relatively simple for the buyers.