I've stocked the standard style in the 3ww shop, link is here: http://shop.3wheelerworld.com/index....product_id=436
I added a poll to gauge interest on which style of LED headlight people like. I know for sure the normal LED headlight fits the 200ES housing, and can be installed in the 200E headlight housing with the spring clips. Might fit other models too, just not sure off hand what ones. Anyway, the "angle eye" style ones are kind of neat, figured it could be wired with dims, or the buyer would have to wire in a switch of choice to control it independently. The angle eye ones are ironically cheaper, never had one in hand, but I suspect the build quality is similar to the other one.
I plan to order atleast one of these style headlights pretty soon, and I'm working on a "DC Power Kit" for the 200 series machines. All will be listed in the 3ww shop once I'm all set to sell them. Also I see the Angle Eye style ones are tested to run on AC power, so should work for any machine with atleast a voltage regulator.
Anyway, for those that like specs, jump to under the photos. I'm thinking the angel eye style, even if the angle eye part isn't used, it has the best specs/price.
"Angle Eye" style Blue, Red, Orange
Standard Style (no ring on the outside).
Specs:
Angle eye style
DOT approved
Waterproof rating: IP67
Voltage input: 9-32v
Wattage: 45W/25W
Lumans: 4750lm/2250lm
Color Temp: 6000K
LED Chips: Phillips (later the product says CREE branded, so conflicting info :-/)
Size: 4x6in
Lifespan: 50,000 hours
Country made in: China
Working Temp: ?
Beam type: Spot
Normal Style
*NOT* DOT approved
Waterproof rating: IP67
Voltage input: 9-30v
Wattage: 45W
Lumans: 3060lm
Color Temp: 5500K
LED Chips: ?
Size: 4x6in
Lifespan: 30,000 hours
Country made in: China
Working Temp: -40~85°c
Beam type: Spot