//ArrowChat Code
Results 1 to 9 of 9

Thread: 1986 ATC 125M...gas tank please?

  1. #1
    Join Date
    Jun 2017
    Location
    Enumclaw, WA
    --
    28

    1986 ATC 125M...gas tank please?

    So, I'm at a dead end with my ATC 125M. The person I bought it from said it was the original tank, and it looks like it fits, but its actually a metal 200ES tank that was 'clearanced' with a ball-peen on the bottom to get it to sit on the frame (and in the process he screwed up the threads where the fuel petcock goes).

    I tried a 200ES replacement plastic tank I have and it wont slide over the frame, the 83-85 ATC 125M tanks are specific, so I'm at my wits end to figure out what to do. They just dont show up on ebay at all. So if someone has one they want to sell, or knows some kind of swap that can happen, I'd be greatful!

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Hard to find tank for sure . I have one that will need a liner if your interested ?
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Jun 2017
    Location
    Enumclaw, WA
    --
    28
    What are we talking about? Lot of rust holes or just rusty inside? (Could try the cider vinegar trick)

  4. #4
    Join Date
    Jul 2018
    Location
    TN
    --
    1,065
    I was born and raised on Venus & I may be here a while.....

  5. #5
    Join Date
    Jun 2017
    Location
    Enumclaw, WA
    --
    28
    Quote Originally Posted by Gabriel View Post
    Thats the one specific to 1983-85, 86 and 87 tanks were unique.

  6. #6
    Join Date
    Jul 2018
    Location
    TN
    --
    1,065
    Ahhh, ok. Like this one. Dang, they're pricey!!!
    http://www.2040-parts.com/honda-atc-...tank-i1676920/
    I was born and raised on Venus & I may be here a while.....

  7. #7
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    I haven’t looked at it in a few years but I believe it has a few pin holes on the lower left side , I think it was clean inside and no major dents .


    Quote Originally Posted by anryu451 View Post
    What are we talking about? Lot of rust holes or just rusty inside? (Could try the cider vinegar trick)
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  8. #8
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Considering the rarity that’s not a bad price at all .


    Quote Originally Posted by Gabriel View Post
    Ahhh, ok. Like this one. Dang, they're pricey!!!
    http://www.2040-parts.com/honda-atc-...tank-i1676920/
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  9. #9
    Join Date
    Jun 2017
    Location
    Enumclaw, WA
    --
    28
    How much are you asking for it?

//ArrowChat Integreation Code //