No such thing as a 1977 110 . The first 110 was made 1979 .
If their 77 flaps their off an atc90 and their defiantly different .
79-82 atc110 are the same flaps for reference .
I may have a set , probably no perfect but usable
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
OK good to know. I was just going off what the seller told me . Let me know if you have a set please.
I also need the headlight . Mine has one but its not OEM at all .. I would even use one from another year Honda if the width is same ? Needs to fit between the stock ears .
Head light on the 81-82 110 is 12 volts and the same but a 185s / 200s light should work and will broaden your search .
80 and older is 6 voltes
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Ironically I was lately poking though headlight diagrams. Be sure you have the stock headlight socket, the wiring changed slightly for other machines. It's item #5 in the diagram link below. And the exact interchange for the socket is below that. Besides that the socket fits in a lot of headlights. I have a lead on new sockets, but I won't have them till past Christmas.
https://www.partzilla.com/catalog/ho...10-a/headlight
81 atc110
81 atc185s
81 atc200
Also if you can, measure the width of the mounting surfaces for the headlight, or if you have the bucket/ring, measure what the headlight width/height is. Trying to compare if this Yamaha part would work. Very affordable price for the bare headlight if it works, but I can't tell what kind of headlight socket it uses from the diagram.
http://www.3wheelerworld.com/showthr...43#post1486943
Also note, even though the older ones are 6v, the ones with replaceable bulbs can have a 12v bulb installed.
All parts of the light are missing. It came with a light that was a total hack job . Ill take measurement later . Thanks for all the info guys !
https://www.ebay.com/itm/1984-Honda-...qBVb:rk:2:pf:0
This might work ?
The big red uses a 4x6in headlight, I think it's slightly larger than what you're working with. I have one right next to me though lol. Mounting width of the headlight guard that holds the headlight bucket measures 7.25in wide.
Last edited by ps2fixer; 11-19-2018 at 03:58 PM.
I would have repainted and wired the light that came with it. However as you can see in the picture he put the switch inside the light , It also was being used as the kill switch. The wires had pulled out of the factory one which is still on the bar thank goodness.
Here are the flaps in question. Just in case you can make sense of them.
https://www.ebay.com/itm/Honda-ATC11...ff32%7Ciid%3A1
I can't see the photo? It looks like it was deleted or something. You don't have to insert inline or anything, it automatically goes to the bottom of the post if you just click done after it uploads (on pc atleast).
Oh also that 200es socket would be the same wiring as what your machine uses (based on the diagram atleast), as long as the stock harness isn't hacked up etc.
Not to plug my own products or anything, but I have a 82 atc110 harness new on hand. Not sure what the differences would be 81 vs 82 though (OEM part number changed)
http://shop.3wheelerworld.com/index....product_id=401
I looked up the mud flap part number and looks like late atc90 and early atc110 used the same mud flaps.
https://www.partzilla.com/product/ho...=80111-942-010
Also you can get new reproduced ones here:
http://shop.3wheelerworld.com/index....product_id=374
Fitment isn't listed, so here it is:
ATC90 K2-K3
ATC90 76-78
ATC110 79-81
Just barely in the "early" range of the atc110 lol, so yea they should work.
Last edited by ps2fixer; 11-19-2018 at 04:19 PM.
Oh just found a cheap harness on ebay for an 81 atc110, looks like the wiring is about 90% the same as the 82, just one connector changed. I'm ordering it just to confirm lengths etc.
Ill just order the flaps from you including the front . Thanks !