I bet you will NEVER EVER EVER again put a motor back together without perfect kicker parts will you??
Glad your all set!
I bet you will NEVER EVER EVER again put a motor back together without perfect kicker parts will you??
Glad your all set!
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
I would not, thats why I dropped $100 for an oem bnib set for mine. The others were missing a bit on the 10.25 to 1, so I knew 12.1 to 1 would be way worse. Didn't want to take a chance.
Think the only one I have had that was worse was my 2003 raptor 660. It had electric but it had 6 or 8 socket head bolts that secured the starter gear to the one way bearing. It had a bad habit of shearing them off, and dropping the heads in the bottom of the motor. Replaced with the strongest I could get from fastenal, lasted way longer than stock, but over time the compression would snap them too. I do not miss that but still miss the bike, it was quick with the ct racing mods I had on it.
Hey shortline, sorry to open an old thread but I have gotten my x up and running and am ready for a carb, will the flat slide mikuni fit in the frame without mods?
"I'm Watchin' The Herk N' Jerk!"
3&2moto on YouTube
Trikefest 10,17,18,19
Yes it fits but you need the short intake manifold , if you use the longer version then the frame needs dented in a little and possibly one of the over flow / vent tubes on the carburetor trimmed .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Manifolds are hard to come by , possibly place a wanted ad here and keep an eye on eBay or make one .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10