//ArrowChat Code
Results 1 to 4 of 4

Thread: 1983 Honda ATC200X Rear Shock Recharge

  1. #1
    Join Date
    Jul 2018
    Location
    Oklahoma
    --
    10

    1983 Honda ATC200X Rear Shock Recharge

    I'm wanting to get my rear shock recharged. I'm unsure if it has any leaks or not, but it probably does. I was going to put some compressed air in there and see if it leaks, but I can't figure out how to get the cap off the resevoir. The manual doesn't show how, and I can't find anything about it on this site.

    Does anybody have experience doing this job? Pictures would be great if anybody has some.

  2. #2
    86125m is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Jan 2014
    Location
    La
    --
    1,062
    just put a monkey wrench on the nippy and pull. it should come right off.

  3. #3
    Join Date
    May 2009
    Location
    S.E. Michigan
    --
    1,250
    Unfortunately, there is no other way than to just grab it with pliers and pop it off.
    - Frank

    1984 200ES Big Red
    1985 350X (x2)
    1986 350X
    1986 250SX
    1984 Auto-X
    1984 ATC70
    1985 ATC70

  4. #4
    Join Date
    Jul 2005
    Location
    Manheim, PA
    --
    5,753
    any shop can blow nitrogen into the shock for 5-10 bucks. Id think you'd want to rebuild or sprung for you weight 1st. I know guy who fully rebuilds them for about $200.

//ArrowChat Integreation Code //