//ArrowChat Code
Page 1 of 6 1 2 3 ... LastLast
Results 1 to 15 of 79

Thread: 1986 Honda 250R build*finished*

  1. #1
    Join Date
    Jan 2010
    Location
    Sulphur Springs,Texas
    --
    1,005

    1986 Honda 250R build*finished*

    I bought this back in Nov of 2017(original post) and have had it on the back burner, mainly because it is in pretty bad shape and is going to take a lot! Another reason is I needed to replace the frame as this one had been cracked/repaired, foot pegs welded to the frame. Finding a nice 86 250r frame close isn't an easy thing to come by here in Tejas. There isn't much good to say about it, it has been rode hard and neglected. I have been getting some replacement parts over the year that I will need for the build and have had the motor at Yaegerb getting freshened up. I got a long way to go on it but I got the time and want to. I'll drop the new frame off for powder next week. Thanks everyone and have a good day!
    Attached Thumbnails Attached Thumbnails IMG_0450.jpg   IMG_0451.jpg   IMG_0452.jpg   IMG_0453.jpg   IMG_0455.jpg   IMG_0456.jpg  

    IMG_0457.jpg   IMG_0459.jpg   IMG_0460.jpg   IMG_0462.jpg   IMG_0465.jpg   IMG_0467.jpg  

    IMG_0468.jpg   IMG_0470.jpg  
    Last edited by Aulbaugh; 03-26-2021 at 01:44 PM.
    • 1985 Honda 250SX
    • 1985 Honda 350X
    • 1985 Honda 350X
    • 1986 Honda 250R



    “I Love The 350x. It’s So Bad”

    My Feedback Link!

  2. #2
    Join Date
    Jan 2010
    Location
    Sulphur Springs,Texas
    --
    1,005
    Current fork condition: Dog crap

    ....Also I picked up this 86 swingarm from Red Rider for the build. The swingarm that was on it has some bad cracks by the bearing holder seals and some deep chain drag in it. Forks are going to be going out for polish and the swingarm out for powder even though I really dig the current color of the swingarm from Red Rider. The 86 carrier I got from a buddy on FB.
    Attached Thumbnails Attached Thumbnails IMG_0471.jpg   IMG_0472.jpg   IMG_0473.jpg  
    • 1985 Honda 250SX
    • 1985 Honda 350X
    • 1985 Honda 350X
    • 1986 Honda 250R



    “I Love The 350x. It’s So Bad”

    My Feedback Link!

  3. #3
    Join Date
    Jan 2010
    Location
    Sulphur Springs,Texas
    --
    1,005
    I picked up this pipe for my engine. Can anyone name that pipe?
    Attached Thumbnails Attached Thumbnails IMG_0315.JPG  

  4. #4
    Join Date
    Mar 2010
    Location
    Slidell, LA
    --
    4,737
    Quote Originally Posted by Hondatcs View Post
    I picked up this pipe for my engine. Can anyone name that pipe?
    I can.......
    Feedback for yaegerb: Click Here

    Need something blasted or polished or both? Send me a PM

  5. #5
    Join Date
    Jun 2010
    Location
    House Springs MO
    --
    5,496
    Looks like a Selvy/Kenny Robert's pipe going by the cylinder flange.

    Sent from my SM-G960U using Tapatalk

  6. #6
    Join Date
    Jan 2010
    Location
    Sulphur Springs,Texas
    --
    1,005
    Quote Originally Posted by yaegerb View Post
    I can.......
    I know you can!!!
    • 1985 Honda 250SX
    • 1985 Honda 350X
    • 1985 Honda 350X
    • 1986 Honda 250R



    “I Love The 350x. It’s So Bad”

    My Feedback Link!

  7. #7
    Join Date
    Mar 2010
    Location
    Slidell, LA
    --
    4,737
    Quote Originally Posted by bkm View Post
    Looks like a Selvy/Kenny Robert's pipe going by the cylinder flange.

    Sent from my SM-G960U using Tapatalk
    You bet brother. That is an original sonic 2 verified by Kenny and Rob.
    Feedback for yaegerb: Click Here

    Need something blasted or polished or both? Send me a PM

  8. #8
    Join Date
    Jun 2010
    Location
    House Springs MO
    --
    5,496
    You need this to go with that pipe.

  9. #9
    Join Date
    Jan 2010
    Location
    Sulphur Springs,Texas
    --
    1,005
    Yea Brian that would be nice! I already got that old PT of yours.
    • 1985 Honda 250SX
    • 1985 Honda 350X
    • 1985 Honda 350X
    • 1986 Honda 250R



    “I Love The 350x. It’s So Bad”

    My Feedback Link!

  10. #10
    Join Date
    May 2006
    Location
    The Open Road
    --
    4,729
    Quote Originally Posted by bkm View Post
    You need this to go with that pipe.
    WTF were you hiding that?

    Sent from my Z958 using Tapatalk

  11. #11
    Join Date
    Jun 2010
    Location
    House Springs MO
    --
    5,496
    Quote Originally Posted by ironchop View Post
    WTF were you hiding that?

    Sent from my Z958 using Tapatalk
    I picked it up last year and was going to use it, but I'm going to run a stock cylinder instead. It's for sale! Lol

    Sent from my SM-G960U using Tapatalk

  12. #12
    Join Date
    Mar 2010
    Location
    Slidell, LA
    --
    4,737
    It may be for sale doug......I haven’t decided yet!!!! Lol I kinda want it

    I know what that is and she’s rowdy and purdy.
    Feedback for yaegerb: Click Here

    Need something blasted or polished or both? Send me a PM

  13. #13
    Join Date
    Jan 2010
    Location
    Sulphur Springs,Texas
    --
    1,005
    Got the forks and triples back from polish from the guys over at Gateway PowderCoating.
    Yaegerb brought these back from the dead! They were in pretty rough to horrible shape on the inside. He built them back up with progressive springs and OEM parts.
    Attached Thumbnails Attached Thumbnails IMG_0362.JPG   IMG_0361.JPG  
    • 1985 Honda 250SX
    • 1985 Honda 350X
    • 1985 Honda 350X
    • 1986 Honda 250R



    “I Love The 350x. It’s So Bad”

    My Feedback Link!

  14. #14
    Join Date
    Jan 2010
    Location
    Sulphur Springs,Texas
    --
    1,005
    Picked up the frame and motor mounts and few other small pieces this morning from Performance Powder Works. I went with Columbia Coatings Super Mirror Red for the powder.
    Attached Thumbnails Attached Thumbnails IMG_0364.JPG  
    • 1985 Honda 250SX
    • 1985 Honda 350X
    • 1985 Honda 350X
    • 1986 Honda 250R



    “I Love The 350x. It’s So Bad”

    My Feedback Link!

  15. #15
    Join Date
    Jan 2010
    Location
    Sulphur Springs,Texas
    --
    1,005
    Are there any replacement 86 rear caliper pistons available? I'm not seeing anything and mine need replacing.
    • 1985 Honda 250SX
    • 1985 Honda 350X
    • 1985 Honda 350X
    • 1986 Honda 250R



    “I Love The 350x. It’s So Bad”

    My Feedback Link!

//ArrowChat Integreation Code //