Ttt
Sent from my iPhone using Tapatalk
Looking to get rid of the steelies on my 200. I know I can swap rear hubs to 300ex/450r etc and have a set of 450r wheels in the garage. I’m more interested in swapping the front out to a 9inch wheel as well. Can I use one of those wheels and use a spacer to center the wheel? Not sure if I’d need a hub off of another trike to do so.
Thanks!
Sent from my iPhone using Tapatalk
Ttt
Sent from my iPhone using Tapatalk
The problem is the 130mm bolt pattern , I don’t know of any maker that made a 9” wheel in 130mm
Check eBay out for a 8” centered rim in 130mm .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
suzuki atv used 4x130 bolt patterns 8" and 9" rims. buy a centered aluminum used rim off ebay for like a 200x, have it machined for larger bolt pattern which they can do... Bolt it on. If not AMS makes new once piece steel rims.
2005 KFX700
2001 Blaster
2015 Rancher 420 dct eps irs
Coal Country Rider
I used a 8”x7”wide x130mm rim on my 185s with a 21” tall tire . Very similar as your picture .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10