//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Page 7 of 7 FirstFirst ... 5 6 7
Results 91 to 105 of 105

Thread: Progressive Spring Kit for 85 250R

  1. #91
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    831
    Make your piece out of a wood block exactly how you’d want it and send it up to mass. I’ll cast one out of aluminum for you just for shipping cost. I’m always looking for a reason to cast something....just need a pattern to copy
    Assuming u need a 3/8 or 1/2 inch spacer or more of some kind
    Shep
    Last edited by Shep1970; 03-30-2019 at 08:22 PM. Reason: Sp

  2. #92
    Join Date
    Dec 2011
    Location
    central oregon
    --
    79
    If thats aluminum any wood tool (jig saw etc) will cut it nicely.
    Twin 1982 ATC200's
    1985 350X
    1985 200X
    and a bunch of 2 wheelers

  3. #93
    DDQ's Avatar
    DDQ is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    May 2015
    Location
    Aberdeen, NC
    --
    350
    Quote Originally Posted by Shep1970 View Post
    Make your piece out of a wood block exactly how you壇 want it and send it up to mass. I値l cast one out of aluminum for you just for shipping cost. I知 always looking for a reason to cast something....just need a pattern to copy
    Assuming u need a 3/8 or 1/2 inch spacer or more of some kind
    Shep
    Thank you for the offer shep!

    The big hole in the middle is proving to be an issue. I don't have anything that can turn that sharp, even for cutting wood.

    I do have access to plasma cutter and cutting the piece out of steel may be the best I can do.

    Sent from my SAMSUNG-SM-G890A using Tapatalk

  4. #94
    Join Date
    Dec 2011
    Location
    central oregon
    --
    79
    This will cut that aluminum.https://www.harborfreight.com/32-amp...saw-69436.html
    Or get on craigslist tools section bet there is at least 5 sub 10 dollar jigsaws on there where you are!
    Twin 1982 ATC200's
    1985 350X
    1985 200X
    and a bunch of 2 wheelers

  5. #95
    DDQ's Avatar
    DDQ is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    May 2015
    Location
    Aberdeen, NC
    --
    350
    I cut this with a plasma cutter and am sending it to Shep in the AM to be cast with aluminum!

    Sent from my SAMSUNG-SM-G890A using Tapatalk

  6. #96
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    831
    I didn’t use your steel plasma one u cut I needed something a bit more smooooth. So if time allows me I’ll get this cast today. Click image for larger version. 

Name:	AF4098EE-F3C1-4F34-B446-623F8DC2583A.jpeg 
Views:	10 
Size:	1.56 MB 
ID:	258119 Click image for larger version. 

Name:	83B42C64-8C7D-4A22-953C-022B1A420695.jpeg 
Views:	11 
Size:	2.20 MB 
ID:	258120 Click image for larger version. 

Name:	B2134033-BF0A-4046-888F-681B8E79BA81.jpeg 
Views:	11 
Size:	1.89 MB 
ID:	258121 Click image for larger version. 

Name:	F1134AA5-B50C-4CF4-9F66-8E45E3EF5D63.jpeg 
Views:	11 
Size:	2.90 MB 
ID:	258122

    I’ll post pics when done.

    Shep

  7. #97
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    831
    Well, a little clean up and I’ll get it in the mail-Click image for larger version. 

Name:	6BDAF0FD-F627-4C94-9D61-992E1B613C13.jpeg 
Views:	11 
Size:	1.83 MB 
ID:	258135 Click image for larger version. 

Name:	355EB603-175E-45CA-A169-BC3EC3C967E1.jpg 
Views:	9 
Size:	2.07 MB 
ID:	258136 Click image for larger version. 

Name:	7AFDCE49-80D4-4B30-9D65-F8753DCF40D1.jpg 
Views:	10 
Size:	1.62 MB 
ID:	258137 Click image for larger version. 

Name:	31753C71-2D3C-4B34-8480-FEA72F0053D5.jpg 
Views:	16 
Size:	1.68 MB 
ID:	258138

    The orange one is my wood pattern, painted it so the sand wouldn’t stick as easy- and made it smoother.
    I’ll drill the 3 holes Sunday on the drill press-I just have to make a path to get to it (garage needs a cleaning)
    Click image for larger version. 

Name:	53100D75-7388-4C0C-907F-93285BB0B98E.jpg 
Views:	10 
Size:	83.6 KB 
ID:	258139

    Shep
    Last edited by Shep1970; 04-06-2019 at 06:12 PM.

  8. #98
    DDQ's Avatar
    DDQ is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    May 2015
    Location
    Aberdeen, NC
    --
    350
    Quote Originally Posted by Shep1970 View Post
    Well, a little clean up and I値l get it in the mail-Click image for larger version. 

Name:	6BDAF0FD-F627-4C94-9D61-992E1B613C13.jpeg 
Views:	11 
Size:	1.83 MB 
ID:	258135 Click image for larger version. 

Name:	355EB603-175E-45CA-A169-BC3EC3C967E1.jpg 
Views:	9 
Size:	2.07 MB 
ID:	258136 Click image for larger version. 

Name:	7AFDCE49-80D4-4B30-9D65-F8753DCF40D1.jpg 
Views:	10 
Size:	1.62 MB 
ID:	258137 Click image for larger version. 

Name:	31753C71-2D3C-4B34-8480-FEA72F0053D5.jpg 
Views:	16 
Size:	1.68 MB 
ID:	258138

    The orange one is my wood pattern, painted it so the sand wouldn稚 stick as easy- and made it smoother.
    I値l drill the 3 holes Sunday on the drill press-I just have to make a path to get to it (garage needs a cleaning)
    Click image for larger version. 

Name:	53100D75-7388-4C0C-907F-93285BB0B98E.jpg 
Views:	10 
Size:	83.6 KB 
ID:	258139

    Shep
    WOW!!!!!!!!!! Shep, I hate that you spent so much time on this but thank you!!! That looks so much better than the steel one I cut! My holes didn't line up quite right either...I can't wait to see it!

    Sent from my SAMSUNG-SM-G890A using Tapatalk

  9. #99
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    831
    Done, when installing line up the black marker lines you’ll see. It fits all three ways but lines up best where marked.
    I’ll throw away your steel plate template if that’s ok? I can ship it out Monday am. It was fun doing this just pass help along to someone else sometime.
    Click image for larger version. 

Name:	C62A064E-CA52-4EA1-A356-9B98C1F03A4B.jpeg 
Views:	19 
Size:	2.71 MB 
ID:	258148 Click image for larger version. 

Name:	6BF0F713-A027-40A1-B47C-77BA68DC3B8A.jpeg 
Views:	13 
Size:	2.01 MB 
ID:	258149 Click image for larger version. 

Name:	6C311AF0-8ACE-4318-85B6-7016B1C247E8.jpeg 
Views:	15 
Size:	2.10 MB 
ID:	258150 Click image for larger version. 

Name:	01B2E492-2917-481B-B352-6DE2ECA9015C.jpeg 
Views:	13 
Size:	2.19 MB 
ID:	258151

    The one single oring between the two will work as intended.
    Your welcome
    You will need a gasket between head+flange though still.

    Shep

  10. #100
    DDQ's Avatar
    DDQ is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    May 2015
    Location
    Aberdeen, NC
    --
    350
    Quote Originally Posted by Shep1970 View Post
    Done, when installing line up the black marker lines you値l see. It fits all three ways but lines up best where marked.
    I値l throw away your steel plate template if that痴 ok? I can ship it out Monday am. It was fun doing this just pass help along to someone else sometime.
    Click image for larger version. 

Name:	C62A064E-CA52-4EA1-A356-9B98C1F03A4B.jpeg 
Views:	19 
Size:	2.71 MB 
ID:	258148 Click image for larger version. 

Name:	6BF0F713-A027-40A1-B47C-77BA68DC3B8A.jpeg 
Views:	13 
Size:	2.01 MB 
ID:	258149 Click image for larger version. 

Name:	6C311AF0-8ACE-4318-85B6-7016B1C247E8.jpeg 
Views:	15 
Size:	2.10 MB 
ID:	258150 Click image for larger version. 

Name:	01B2E492-2917-481B-B352-6DE2ECA9015C.jpeg 
Views:	13 
Size:	2.19 MB 
ID:	258151

    The one single oring between the two will work as intended.
    Your welcome
    You will need a gasket between head+flange though still.

    Shep
    Thank you!! Yes, throw the junk that I made away.
    I am stoked to mount it up!

    Sent from my SAMSUNG-SM-G890A using Tapatalk

  11. #101
    Join Date
    Dec 2011
    Location
    central oregon
    --
    79
    Wow excellent work!!
    Twin 1982 ATC200's
    1985 350X
    1985 200X
    and a bunch of 2 wheelers

  12. #102
    DDQ's Avatar
    DDQ is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    May 2015
    Location
    Aberdeen, NC
    --
    350
    Shep did an amazing job, it fits great!


    Sent from my SAMSUNG-SM-G890A using Tapatalk

  13. #103
    DDQ's Avatar
    DDQ is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    May 2015
    Location
    Aberdeen, NC
    --
    350
    I just spend an hour at a shoo trying to get help bleeding my rear brakes after rebuilding the master cylinder. We could not get any pressure at the end of the line and there seems to be air and fluid leaking out of the bottom of the master around the rod. How can it be leaking there? I cleaned the cyl very well and followed the manual rebuilding it


    Sent from my SAMSUNG-SM-G890A using Tapatalk

  14. #104
    barnett468 is online now FACT ! I have no edit button Arm chair racerThe day begins with 3WW
    Join Date
    Jan 2013
    Location
    minnesota
    --
    5,894
    Its leaking past the seal in the master.

  15. #105
    DDQ's Avatar
    DDQ is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    May 2015
    Location
    Aberdeen, NC
    --
    350
    Just as a final update...

    I completed the build a couple weeks ago and finally did a few minutes of riding to jet the 36 pwk. I settled at 48/ 165.

    My first real ride on it will be Friday for practice at the South of the Border MX national. I am going to race it Saturday. I just want to thank Shep one more time for the hard work on the exhaust spacer and I am SO excited to have a running, riding 250!



    Sent from my SAMSUNG-SM-G890A using Tapatalk

//ArrowChat Integreation Code //