//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 5 of 5

Thread: 250sx Swing arm play

  1. #1
    Join Date
    Feb 2019
    Location
    Missouri
    --
    7

    250sx Swing arm play

    Hello. New here and just picked up a 1986 250sx. Itís a little beat up and wasnít taken care of and trying to bring it back to life and notice the swing arm has a lot of play where it meets the frame. Havenít looked at it much but looking for somewhere to start. Iíve ordered the tool to remove the pivot bolts but thatís as far as Iíve got. What other tools/what part would need replaced to get it tight again. Thanks

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    5,895
    A set of swingarm bearings and seals is needed .
    It usually takes a blind bearing puller and some heat from a torch to get them out .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Feb 2019
    Location
    Missouri
    --
    7
    Do you know of a good set to buy and where from. Iíve heard a few say all balls racing are decent. And would the whole rear end need to come apart to get them out?

  4. #4
    Join Date
    Jul 2009
    Location
    South Florida
    --
    5,895
    I’m sure eBay or even amazon has the kits . All balls bearing kits are ok , no need to pull the rear end apart to change the swingarm bearings .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  5. #5
    Join Date
    Feb 2019
    Location
    Missouri
    --
    7
    Just ordered a kit and weíll see how it goes. Everything looks pretty rusty and old hopefully itíll come apart easy. Appreciate the help

//ArrowChat Integreation Code //