//ArrowChat Code
Results 1 to 6 of 6

Thread: 1984 Honda 200es carb

  1. #1
    Join Date
    Jul 2013
    Location
    Underwood, MN
    --
    65

    1984 Honda 200es carb

    Good morning. I have an '84 200 ES that I'm rebuilding the carb on. I also have another carb for spare parts. The needle jet holder in the PD55 carb only has the 2 holes in the side towards the top whereas the spare carb has 4 holes. Which is correct for the PD55?

    Sent from my LM-G710VM using Tapatalk

  2. #2
    Join Date
    Nov 2015
    Location
    Davenport iowa
    --
    1,144
    Quote Originally Posted by red_russian1 View Post
    Good morning. I have an '84 200 ES that I'm rebuilding the carb on. I also have another carb for spare parts. The needle jet holder in the PD55 carb only has the 2 holes in the side towards the top whereas the spare carb has 4 holes. Which is correct for the PD55?

    Sent from my LM-G710VM using Tapatalk
    I can tell you what the oem part number is. #16165-958-681. By looking at some pics of that correct jet my guess is the one on the left as I look at your pic..
    90 nickolson Bored and Stroked "The Good"

    Big Bore 110 Pauter frame "The Bad"

    90 Bored and Stroked “vey’s frame” "The Ugly"

    110 JSC frame Bored and Stroked
    flat track build. “Shop trike”

    1974 original 90 X 2

    1974 Original 70.

  3. #3
    Join Date
    Jul 2013
    Location
    Underwood, MN
    --
    65
    I found the part number on Babbitts but I can't find a decent picture to see how many holes it's supposed to have. I'm assuming that it'll make a difference on which one I install...

    Sent from my LM-G710VM using Tapatalk

  4. #4
    Join Date
    Nov 2015
    Location
    Davenport iowa
    --
    1,144
    There was a clear pic of one on eBay and it was the one on the left. Post pics of your 90's
    90 nickolson Bored and Stroked "The Good"

    Big Bore 110 Pauter frame "The Bad"

    90 Bored and Stroked “vey’s frame” "The Ugly"

    110 JSC frame Bored and Stroked
    flat track build. “Shop trike”

    1974 original 90 X 2

    1974 Original 70.

  5. #5
    Join Date
    Jul 2018
    Location
    TN
    --
    1,065
    These carbs will drive (some of us) fackin' nutz!

    If'n you find you're missing something, I just parted out about a dozen of the sorry things. Lemme know what part you need....I'll give it to ya.
    I was born and raised on Venus & I may be here a while.....

  6. #6
    Join Date
    Jul 2013
    Location
    Underwood, MN
    --
    65
    Quote Originally Posted by DAM shop View Post
    There was a clear pic of one on eBay and it was the one on the left. Post pics of your 90's
    Ah, ! I see that now! Thanks!

    Sent from my LM-G710VM using Tapatalk

//ArrowChat Integreation Code //