Good evening! About 6 years ago, I acquired my brothers 250R (the one in the pics). I stripped it down to the frame, rebuilt/repainted nearly every part and bored the cylinder out to about .070" over (I'm guessing because I don't recall off the top of my head). I also installed a set of Boyesen Pro Series reeds and Moose torque spacer. After I broke in the rings, I found a guy that was selling a larger carb off of a supposed '84 or '85 250R. I think I paid $40 but never installed it because I wanted to put a kit in it and I also would've needed to remove the air box and install a filter directly on the carb.
Well, 6 years later and after the trike has been sitting for 4 of those, I decided to dust it off. Choke is broken, right tire is flat and a mouse nest in the air box but it started after about 5 kicks!
So, my question is; has anybody installed this larger carb on their trike? I'm just looking for some info on what jets to install, air filter to use, etc. Thanks in advance!
Sent from my LM-G710VM using Tapatalk