//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 2 of 2

Thread: Help getting 200x front end on 120

  1. #1
    Join Date
    Nov 2015
    Location
    Chatsworth, NJ
    --
    2

    Help getting 200x front end on 120

    Got a 85 AT 110 and 85 ATC200x front triples and shocks. Will these interchange? Any mods needed to be done

  2. #2
    Join Date
    Apr 2006
    Location
    SE CA Dez in the sandbox
    --
    858
    Take a look at this thread http://www.3wheelerworld.com/showthr...light=ol+deuce
    and http://www.3wheelerworld.com/showthr...tree-on-my-110

    The front wheel is an 8" on a 6" wide rim, specifically 4/110 Douglas .125 Wheel 8X6 3.0 + 3.0 which requires a turned down stock 200x hub to fit the 8" diameter rim. FYI I have two of these turned down hubs which I've never used.

    Randy didn't like the stock 200x tire/rim and wanted a proportional look to the rear rims.

    Hope that helps.
    Last edited by RapidRick; 06-20-2019 at 03:30 PM. Reason: more information
    '85 350X-XR500 Hybrid,
    Nicholson Framed: 90/110, 185s, Gen I 500, Gen II 500
    Bandito Framed 90
    Vey's Framed 90

//ArrowChat Integreation Code //