Yea the 82-83 harness shouldn't be too much of a problem, I'll have to figure out how much to charge since it's one of the more complex harnesses to make.
There's 2 other people that I'm aware of that makes harnesses on and off for machines, one makes tecate harnesses, and the other I saw them making race style trx250r harnesses. Both sellers seemed to have disappeared though.
The best years for Honda, 84-85 sadly used a CDI connector that I can't seem to get. A business partner found the CDI side of the connector, but min order is 10,000 connectors, a bit more than what we could probably really use even though there's a LOT of 200ES machines out there with that plug. I'm hoping I'll be able to reproduce the connector in a silicone mold and have it turn out well, but I need more equipment and can only buy stuff as funds allow for.
Anyway, 82-83 uses an older style connector, very common and readily available, so no problems there, and 86+ machines typically used the "modern" 4+2 style CDI connector which also is readily available.
The ignition switch I sell, I won't lie and do marketing BS, it doesn't like swamp water or acid water getting in them. Out of about 1000 sold, I've had two people have issues with mud/water getting in the switch and causing rust and problems. I've added lube to those areas to help be an anti corrosive ever since then. Even the OEM Honda ones are not water proof, but they are pretty water resistant. This is also why I sell the ignition switch with the rubber key cover, it helps shield the switch from water/mud from getting into it. I see some sellers selling the switches that are just a key kind of like for a car, no shielding or anything, in fact my supplier slips a few of them in my orders sometimes so I often sell them like 1/2 priced just to get rid of them.
I have quite a bit of stuff setup btw lol. I have a webstore, but it gets so little traffic I don't keep it fully updated/in stock. Same goes for my 3ww shop listings, I have to run them them some time and restock some stuff.
Web store -
http://atcfixer.com
3ww Shop Items -
http://shop.3wheelerworld.com/seller...ixer/products/
I also have a
parts interchange site that's probably getting replace called
http://atvinterchange.com probably going to replace it with
http://atvmanual.com though since I want it to be a good 1 stop resource for any tech info and maybe get some guides on how to do different jobs and such. Not limiting myself to 3 wheelers since I enjoy quads and side by sides are alright too. Snowmobiles, off road trucks etc I could add down the road, but first need to get solid info up for at least the 3 wheelers. Kind of funny, my site names are not too different, guess it's just how my mind works, right to the point (sometimes at least).
You'd probably be shocked how horrible some of the harnesses I've bought off ebay were. Nearly all of them were listed and good usable condition, but plenty had broken wires, very dry rotted wiring, or super corroded connections. I think about 20-25% of the harnesses I've bought are good enough I'd even think about using on a machine. My collection of harnesses almost covers all Honda 3 wheelers, got a couple of years of the 250r to go and I'd like to get an 87 200x harness some day just to have it on hand, I have notes on the differences, but it's nice to have it on hand.