//ArrowChat Code
Results 1 to 4 of 4

Thread: Shifter shaft for atc 90/110

  1. #1
    oldoo's Avatar
    oldoo is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    May 2017
    Location
    Australia
    --
    155

    Shifter shaft for atc 90/110

    Hey guys chasing a shifter shaft for an atc 110

    Partzilla says there the same for all atc 90 up to 1983 ish atc 110?

    I’m in Australia and it’s going to cost me an arm and a leg for one. Will one from a ct90 fit? It’s basically the same motor with high low range ect.

    Can someone please confirm if a shifter shaft from a ct90 will fit?

    because there are heaps of ct90’s around here and will be a lot cheaper for me.

    Cheers


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Nov 2015
    Location
    Davenport iowa
    --
    1,144
    Quote Originally Posted by oldoo View Post
    Hey guys chasing a shifter shaft for an atc 110

    Partzilla says there the same for all atc 90 up to 1983 ish atc 110?

    I’m in Australia and it’s going to cost me an arm and a leg for one. Will one from a ct90 fit? It’s basically the same motor with high low range ect.

    Can someone please confirm if a shifter shaft from a ct90 will fit?

    because there are heaps of ct90’s around here and will be a lot cheaper for me.

    Cheers


    Sent from my iPhone using Tapatalk
    I'm thinking Shortline might know the answer to this.
    90 nickolson Bored and Stroked "The Good"

    Big Bore 110 Pauter frame "The Bad"

    90 Bored and Stroked “vey’s frame” "The Ugly"

    110 JSC frame Bored and Stroked
    flat track build. “Shop trike”

    1974 original 90 X 2

    1974 Original 70.

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Been a while but I believe their different , something to do with the kickstarter and clutch cover .
    Are the Part numbers showing different ?
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  4. #4
    oldoo's Avatar
    oldoo is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    May 2017
    Location
    Australia
    --
    155
    Quote Originally Posted by shortline10 View Post
    Been a while but I believe their different , something to do with the kickstarter and clutch cover .
    Are the Part numbers showing different ?
    Yeah mate part number shows their different


    Sent from my iPhone using Tapatalk

//ArrowChat Integreation Code //