//ArrowChat Code
Results 1 to 4 of 4

Thread: 1982 atc185s stator help.

  1. #1
    Join Date
    Aug 2018
    Location
    Little Rock, Arkansas
    --
    40

    1982 atc185s stator help.

    I recently purchase a stator for my trike but im a little confused as to where i resolder the wire. The red post or the blue.Click image for larger version. 

Name:	20190626_232245.jpg 
Views:	95 
Size:	972.5 KB 
ID:	259102

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    On the red , the blue is the ground and nothing goes their .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Aug 2018
    Location
    Little Rock, Arkansas
    --
    40
    You are the man! Thanks bud.

  4. #4
    Join Date
    Apr 2012
    Location
    USA
    --
    4,114
    Just to confirm what shortline10 said but say it in another way, the coil you have circles on is the exciter coil. The center tab (red circle) should connect to the black/red wire in the main harness. The coil internally grounds according to the wire diagram, so nothing needed on the other tab.

    The other coil is for the lighting circuit, it needs two wires soldered on it for it to work (can't see if they are soldered on or not). Colors would be Yellow and Green.

//ArrowChat Integreation Code //