On the red , the blue is the ground and nothing goes their .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
You are the man! Thanks bud.
Just to confirm what shortline10 said but say it in another way, the coil you have circles on is the exciter coil. The center tab (red circle) should connect to the black/red wire in the main harness. The coil internally grounds according to the wire diagram, so nothing needed on the other tab.
The other coil is for the lighting circuit, it needs two wires soldered on it for it to work (can't see if they are soldered on or not). Colors would be Yellow and Green.