//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 5 of 5

Thread: 3 wheeler issue

  1. #1
    Join Date
    Jul 2019
    Location
    North Carolina
    --
    2

    3 wheeler issue

    okay I have a three wheeler that runs great for 10 minutes everything shifts properly all the oils are good the transmission looks good inside everything looks good but after 10 minutes it stops running good. Well it stays running but it acts like it doesn't want to drive. But still shifts normal. But sounds like it's winding out when I give it gas... does anyone have any suggestions on this.. please help.. thanks

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    5,900
    Might be time for a new clutch or possibly clutch adjustment , have you been running car oil ? That will cause the clutch plates to fail , only Atv oil can be used .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    May 2006
    Location
    My underwater lair
    --
    3,944
    Quote Originally Posted by shortline10 View Post
    .... , have you been running car oil ? That will cause the clutch plates to fail , only Atv oil can be used .
    Seriously?

    There's another important gem of information that I didn't know. I'm running Honda gear oil in my 250R but I've topped off the utility machines with car oil and didn't realize I shouldn't do that

    Sent from my Z958 using Tapatalk

  4. #4
    Join Date
    Jul 2019
    Location
    North Carolina
    --
    2
    Awesome thanks 4 the direction.. I'll jump on it after work today..

  5. #5
    Join Date
    Jul 2009
    Location
    South Florida
    --
    5,900
    Way to many friction additives in car oil . The heavy gear oil on the 250r is fine but it tends to make the clutch sticky and drag some until it’s warmed up , not all bikes have this issue but I’ve seen it a lot .


    s
    Quote Originally Posted by ironchop View Post
    Seriously?

    There's another important gem of information that I didn't know. I'm running Honda gear oil in my 250R but I've topped off the utility machines with car oil and didn't realize I shouldn't do that

    Sent from my Z958 using Tapatalk
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //