Off idle bog.
All right guys need a starting point here and I know this has been discussed before but searching old threads is a pain imo.
What we have is a bored and stroked 90, running a mikuni VM 22 carb with a full race cam.
The trike has a serious bog off idle when cracking the throttle wide open. Tried slide cutaway, Needle those don't help so I'm down to jets I believe. It's running a 100 main and 30 pilot. Any suggestions here? 1/4 - top end is perfect just can't get the snap at low end throttle opening.
90 nickolson Bored and Stroked "The Good"
Big Bore 110 Pauter frame "The Bad"
90 Bored and Stroked “vey’s frame” "The Ugly"
110 JSC frame Bored and Stroked
flat track build. “Shop trike”
1974 original 90 X 2
1974 Original 70.