//ArrowChat Code
Results 1 to 3 of 3

Thread: 85 250 sx choke problem

  1. #1
    Join Date
    Aug 2019
    Location
    Orangeville, Ontario canada
    --
    1

    85 250 sx choke problem

    Tried removing my choke plunger in the carb and broke the needle off on the end and it won't come out what's my solutions here.

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Sometimes you can drill the center of the plunger and use an easy out and a little heat around the case at the plunger will help . Lots of penetration fluid .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    Just reread your post , if it’s the tip of the plunger that’s stuck then your probably best to find a new carburetor .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //