//ArrowChat Code
Results 1 to 3 of 3

Thread: carb issues

  1. #1
    Join Date
    Aug 2019
    Location
    CA, USA
    --
    1

    carb issues

    hello, just joined looking for help. I have a 1980 Honda 110, replaced carb on it, now it leaks when opening gas valve out a small hole in front of butterfly valve. possible wrong carb? bought new on Amazon.

  2. #2
    Join Date
    Nov 2015
    Location
    Davenport iowa
    --
    1,144
    Quote Originally Posted by Jmccon1 View Post
    hello, just joined looking for help. I have a 1980 Honda 110, replaced carb on it, now it leaks when opening gas valve out a small hole in front of butterfly valve. possible wrong carb? bought new on Amazon.
    If you bought new from Amazon I'm assuming it's a Chinese carb and those are not the most reliable. Do you have fuel filters on yo keep any dirt out of the Carb?
    90 nickolson Bored and Stroked "The Good"

    Big Bore 110 Pauter frame "The Bad"

    90 Bored and Stroked “vey’s frame” "The Ugly"

    110 JSC frame Bored and Stroked
    flat track build. “Shop trike”

    1974 original 90 X 2

    1974 Original 70.

  3. #3
    Join Date
    Jul 2018
    Location
    TN
    --
    1,065
    Chinese carbs = Dookie

    If you MUST use a chinese carb, always pull it completely apart and look for burrs, shavings, float height and proper jet sizes. Those meat droids over there crank stuff out with no concern for quality control.
    I was born and raised on Venus & I may be here a while.....

//ArrowChat Integreation Code //