//ArrowChat Code
Results 1 to 3 of 3

Thread: 1981 185S Alternator disassembly: help!!

  1. #1
    Join Date
    Sep 2019
    Location
    MO
    --
    36

    1981 185S Alternator disassembly: help!!

    Hello again everyone. This little trike is testing my novice mechanical skills. I'm trying to disassemble the left side crank case to replace a gasket (oil leaking through pull start assembly). I've gotten it about as far as I can go, and now need more experienced advice. I've got the nut and washer off the bolt that goes through the alternator, and all 4 8mm bolts that go through the crankcase.

    How do I get the alternator to come loose off the bolt? I'm guessing when I get that to happen, I can remove the crankcase. As always, thanks for your help!

  2. #2
    Join Date
    Sep 2019
    Location
    MO
    --
    36
    Here's the picture of where I got stuck.

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,722
    You need a flywheel puller , go on eBay or amazon and order one .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //