Registered User
New to the board
just picked up a 70-71 us90 with all 3 balloon tires split.i want to run the 4-snow tires on the front and rear.can i use the original hubs on some other year and model rim.and what would that be.im sure other people have done this feel free to post pictures i would like to see what it would look like.thanks
Just Too Addicted
Arm chair racerJust too addicted
I believe they made adapters to be able to run the 3x100 atc90 rim.
Sent from my moto x4 using Tapatalk
1985 250r
1985 200s
1984 200x
bandito x2
1979 atc70
Trikefest 2012,13,14,15
Power User
The day begins with 3WW
Run a balloon knobby on rear. 4 snow tires have no protection and you will plug them alot on the front. Rear is ok. You can just refill bolt in alum rims for the 3x pattering or have hub machined down and have 4x110 bolt circle welded to them. Alot of things can be done at a local machine shop.
Power User
The day begins with 3WW
Dratv.com used to sell the hub adapters .
I haven’t looked to see if their still available .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Just Too Addicted
Arm chair racerJust too addicted
You could just switch the axle out too, there pretty cheap. There's a picture on here somewhere of a us90 with blacked-out rims and hubs that looks really good.
Sent from my moto x4 using Tapatalk
1985 250r
1985 200s
1984 200x
bandito x2
1979 atc70
Trikefest 2012,13,14,15
Just Too Addicted
Arm chair racerJust too addicted
You have several options. 3 bolt adapter plates bolting to original hubs or replace front and rear axle assemblies with '75 and newer 90/110 assemblies.
"HJ"
’84 YT60
’85 350x (423cc) with ’81 XL500 head conversion
’83 XR500 (628cc) converted 3 Wheel hybrid
’73 CB750 K3 converted 3 Wheel hybrid
’86 TRX250R chassis XR650L engine hybrid
’89 TRX250R (stock )
’90 LT500 Quadzilla
’85 FL350 Odysses ( water cooled head )
Lost (sold) but not forgotten ’80 ATC 110 (205cc on alcohol ) ’83 200x ( 222cc ) ’83 200x ( 185s eng ) ’85 350x ( stock )
added to the collection recently, (2) '70 US90 Aquarius Blue and '74 ATC90 Daytona Orange
Just Too Addicted
Arm chair racerJust too addicted
Hey HairyJ , very nice collection.Originally Posted by HairyJR
You have several options. 3 bolt adapter plates bolting to original hubs or replace front and rear axle assemblies with '75 and newer 90/110 assemblies.
"HJ"
* 1970 US90 Red
* 1978 ATC 90/180 Helm&Son, Bandito /3D springer. ( Spaghetti Winder )
* 1978 ATC 90/128 Bandito / Ace Williams Springer.
* 1980 ATC 110/ ? Helm&Son, Dickson Full Suspended
* 1981 ATC 110 MTC Full Supended
* 1985 ATC 200s
*1986 ATC 250R/310 2"+ Westcoast Swinger
http://www.ebay.com/usr/jwheeler760
Power User
Teaching quads a lesson
I bought used rims and tires from a member on here for my camo trike build. The adaptor plates were already on it so I can't chime in on their source, sorry.
http://www.3wheelerworld.com/showthr...ight=camo+us90
Last edited by coolpool; 11-02-2019 at 11:23 AM.
Trikes
1970/71 US 90 (Aquarius Blue)
1970/71 US 90 (Future Project)
1972/73 US 90 Camo Project (110 Big Bore)
1972/73 US 90 Green
1977 ATC 90 w/83 110 motor (Fugly)
1982 ATC 70
1983 ATC 70 (Ladybug)
1973 ATC 70
1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain
TF 2015
Other
1983 Honda Z50
1978 Honda XL75
Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
http://www.3wheelerworld.com/showthr...k-for-coolpool
Reply With Quote