I should mention that I did take off the plastics as well as a metal basket on the front.
It's most likely a 1984 ATC 200m .
* 1970 US90 Red
* 1978 ATC 90/180 Helm&Son, Bandito /3D springer. ( Spaghetti Winder )
* 1978 ATC 90/128 Bandito / Ace Williams Springer.
* 1980 ATC 110/ ? Helm&Son, Dickson Full Suspended
* 1981 ATC 110 MTC Full Supended
* 1985 ATC 200s
*1986 ATC 250R/310 2"+ Westcoast Swinger
http://www.ebay.com/usr/jwheeler760
You can also use my site below to look up the VIN number on the neck of the frame as well as the engine's serial number which should be near the bottom of the case near the sprocket area.
http://atvmanual.com/honda/interacti...er-atv-and-atc
If there's a mix of parts, I have some machines covered in my post detailing year to year differences for different harnesses. If it's a 200m I can look at the harnesses I have on hand so you know if the harness is an 84 vs 85. Might help tell a story on what happened with the machine and what all it's been merged with.
http://3wheelerworld.com/showthread.php/187317
200cc, Chain drive, electric start & NO transfer case.....that can only be an "M" engine.
I was born and raised on Venus & I may be here a while.....