I recently acquired a 90/110 hp atc trike. Almost complete! I just need some help identifying certain parts like the forks and front huh setup.
I recently acquired a 90/110 hp atc trike. Almost complete! I just need some help identifying certain parts like the forks and front huh setup.
Front hub looks stock to me with a disk welded to it .
Triple clamps look like HPATC , forks are possibly 82 ATC250R .
Awesome score BTW , very rare frame .
Got a picture of the other side
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
I noticed that it is a stock hub but it’s not welded it’s bolted to that plate. That plate is drilled to fit a 12 inch wheel I think from a bw or tri z. I don’t think they are early 250r forks from the pics I’ve seen online. They look very similar to rd250,350,400 forks. I found a picture of one of their ads and it says 34mm triples fit those three forks. And thank you not bad for 20 bucks!!
Yes definitely a great find @ $20.
Front hub looks to be aftermarket. Possibly a Dickson but 90/110 stuff. Triples look to be HPATC to match the frame. Odd it has a drum brake set up on the rear.
Motor looks to have mods as well with allen bolts and crank case breather. I'm with Mike. Lets see pics from the other side. Appears to be an old duner.
* 1978 ATC 90/180 Pauter PJ1 / Springer "Team BAPP" Bike *
* 1980 ATC 110/180 "Danny's Machine Works" 3D Sprint Dune Bike *
* Nicholson 500 Race Bike *
* HPATC Yamaha RD350 "Big Moe" Trike *