//ArrowChat Code

Upcoming Events for the Next 120 Day(s)

Results 1 to 3 of 3

Thread: 85 Honda ATC250SX carb swap with 350X

  1. #1
    Join Date
    Jan 2020
    Location
    TX - Texas
    --
    1

    85 Honda ATC250SX carb swap with 350X

    Hello, I couldn't find the answer anywhere on here, so please forgive me if this has already been asked. Will an 85 atc 250sx run with a 350x carburetor? I see a direct replacement 350x carb on Ebay and it looks like it'd fit just fine and I wouldn't have to deal with the choke cable anymore either.

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,067
    A 300ex carburetor would be a better choice as an upgrade . The 350x inlet size is a lot larger .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Oct 2002
    Location
    Northeast
    --
    17,056
    Shortline know his stuff, so try the 300EX.

    But, if you already have a 350X carb, it seemed to work great for me. I have a Supertrapp and an open air box with an 11:1 piston 2mm oversized, so I didn't have a ton of jetting to do.

    It worked out very well for me.

    The nice thing is that the cold start problems disappear with a different carburetor. If I recall correctly, the choke lever hits something and I had to bend it and or remove some material with a cut off wheel.

    I used a heat gun to get on my intake.
    WHO IS Q?? WWG1WGA!!


    86 ATC200X Flatrack ( I may not be fast but this is one FAST 200X!!

    86 ATC350X Motocross, 86 ATC452X Flatrack!!

    07 Weekend Warrior Toy Hauler

//ArrowChat Integreation Code //