Hi everyone,
I’m new to trikes and new to forums. I like two strokes and welding. The plan is to convert a poor old Ktm 250sx biped into something of the three legged variety. I have ordered a xc450 swingarm, axle,carrier,and rotor. For the front end I ordered a set of 1800vxt triple clamps
and a 200x front hub. I’m gonna get the frame completely stripped down while I wait for parts. I’m gonna assemble it and test it then strip it and make it pretty after. That’s sorta the plan but it is subject to change as I learn things.
. Main concerns are rake angle, frame clearance, and suspension setup. I want to corner and jump. I need to get parts then see what needs to be moved where. Thanks.