I'm restoring an '87 250sx and a buddy of mine is letting me use his mostly mint '86 as a model for cable and wire routing, etc. There are some subtle differences between the '86 and '87 in the carb hose routing, but I can't seem to get the choke cable routed correctly. The '86 has it routed up the right side of the main frame tube over the engine, around the steering stem, and up to the choke lever. If I route the one on the '87 the same way, it looks about 4" too long. The service manual doesn't show the routing. Does anyone have any pics or description of the correct routing for an '87?