Installing some new front wheel bearings in what I believe was a 86 350x front hub. Sprocket side dust seal sits flush with the hub face. My 85 hub seal sits some what below the surface with a bit of a gap which I need to make the front axel sit in all the way in.
I took them both apart and found the hub on the left with 1.020” front the top of the lip to the inside shoulder where the bearing sits in. The hub on the right 0.820”. Could the hub on the right be a 86/87 200x? I know the 86 200x had the same front wheel as a 86 350x in Canada
Any info would be helpful. Thank you