Thanks BarnBoy,
I was thinking the grooves in the drum must be normal, I couldn't imagine a rubbery shoe wearing away steel like that.
I just had the lower end of a 200es come into the shop as
parts, I snatched the whole drum/plate/centrifugal clutch, cleaned it and installed it into the 185.
partzilla diagram says they both share the same part number for the entire drum and the internals of it.
While I was there and had the
parts, I replaced the clutch disc and springs. figured it wouldn't hurt.
My major concern is whether or not the one way bearing was any good, wont know till I ride it and it gets hot. Waiting on a new petcock and seat cover and that one will be finished.
MrC.