//ArrowChat Code
Page 2 of 2 FirstFirst 1 2
Results 16 to 29 of 29

Thread: 83-85 honda 200x seat/frame rectangular rubber thingy's

  1. #16
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    Quote Originally Posted by Shep1970 View Post
    Small headlight shell batch will be this week- end of wk. yes i have extra dash caps (i'll toss them in the box) when i send u a package.
    I've gotta resurect my kids old chinese 70 atv for my wifes/cousins/step daughters 9yr old son first of the wk. That oughta be fun (NOT).

    shep
    ps- your 87 honda 200x rubbers are different than these anyway (yours are still available new)
    Sounds great, thank you. I got lucky, my father-in-law did all the resurecting of my daughter's Eton before he gave it to her, lol. Sorry I should have been more specific, I went out to check my dash. I've learned that just about everything is different between the gen 1's and gen 2's, haha.
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

  2. #17
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    1,326
    Quote Originally Posted by jasong_10 View Post
    Sounds great, thank you. I got lucky, my father-in-law did all the resurecting of my daughter's Eton before he gave it to her, lol. Sorry I should have been more specific, I went out to check my dash. I've learned that just about everything is different between the gen 1's and gen 2's, haha.
    Gotcha-

    I've got a box of new china parts im throwing at this thing, been sitting outside for 7yrs ish. The engine has always ran beautifully so tires/brakes/switches/new tank, carb, lines and more- she should be good to go....Its amazing what $160 in china parts gets you. I figure a camo paint job too and i'll ship it out/away for good. Never to return.......

    Click image for larger version. 

Name:	67EFBA5C-DCFF-4D03-8DC9-3E86F0E03169.jpg 
Views:	14 
Size:	1.60 MB 
ID:	263915 Click image for larger version. 

Name:	8E376F84-FE5C-4E9D-87C2-476124A29F8B.jpeg 
Views:	10 
Size:	2.85 MB 
ID:	263916

    The kid should enjoy it for a few yrs. Good kid but spends too much time indoors/think i'll show him a fun outdoor activity.
    His dad is long gone, took off for good yrs ago.
    shep
    Last edited by Shep1970; 08-08-2020 at 09:25 PM.

  3. #18
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    Quote Originally Posted by Shep1970 View Post
    Gotcha-

    I've got a box of new china parts im throwing at this thing, been sitting outside for 7yrs ish. The engine has always ran beautifully so tires/brakes/switches/new tank, carb, lines and more- she should be good to go....Its amazing what $160 in china parts gets you. I figure a camo paint job too and i'll ship it out/away for good. Never to return.......

    Click image for larger version. 

Name:	67EFBA5C-DCFF-4D03-8DC9-3E86F0E03169.jpg 
Views:	14 
Size:	1.60 MB 
ID:	263915 Click image for larger version. 

Name:	8E376F84-FE5C-4E9D-87C2-476124A29F8B.jpeg 
Views:	10 
Size:	2.85 MB 
ID:	263916

    The kid should enjoy it for a few yrs. Good kid but spends too much time indoors/think i'll show him a fun outdoor activity.
    His dad is long gone, took off for good yrs ago.
    shep
    Ah, yeah I think my father-in-law spent $400 on my daughter's Eton and then probably stuck another $400 into it but it's been flawless for three years now. All I've had to do is put a new fender on it after she hooked left into a barb wire fence (not a scratch on her luckily). I agree, camo seems like a good choice. I hope to get mine through two more daughters so I might have mine a while yet, lol. Yeah, I think a lot of kids spend too much time inside on devices/phones/etc., my wife and I try to limit TV as much as possible, and are going to hold out as long as we can before they get phones. It's great that you're willing to step in and be a male role model for him, it will benefit him greatly, kudos shep.
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

  4. #19
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    1,326
    jason- aiming for monday at the latest for headlight shells. This little guy has been tempting my patience, every bushing was frozen from sitting it all came apart and was greased but fought me all the way, dry bearings (replaced). It got a $10 paint job.... still need to replace carb, and electronics cause they're cheap and have it already..Click image for larger version. 

Name:	8BD4D77E-5117-4B6E-8F04-B020218EF5F7.jpeg 
Views:	8 
Size:	2.74 MB 
ID:	263980
    Just need to finish this first (almost done).Click image for larger version. 

Name:	968EB03A-EB32-44A7-8BF9-2BDF53BF499D.jpg 
Views:	5 
Size:	1.53 MB 
ID:	263979
    Click image for larger version. 

Name:	027590E7-9863-4E9C-B425-4768E52C0023.jpg 
Views:	8 
Size:	1.67 MB 
ID:	263978
    considering this china atv is 13 or 14 yrs old she's in pretty good shape.
    pictures loaded wierd-hmm...
    Last edited by Shep1970; 08-13-2020 at 09:14 PM.

  5. #20
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    That works for me.

    I'm the same way, once I start a project, I can't walk away from it until it's done, lol. That does look good considering it's "experience", he's going to have a blast with it.
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

  6. #21
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    1,326
    jason, i guess i lied about monday
    I've gotta mount 4-tires today, grab a battery tonight, motor spins over nicely by hand (elec start only) Then gas her up tomorrow/ so aiming for mid wk for shells/ sorry.
    welcome to my day
    get this china thing done/
    pouring tri-z rubber throttle cover things/in house-
    my youngest is home taking an on-line drivers ed course, 6 hours per day x 5 days.
    im in the hot sun on the driveway/to hot for mosquitoes though....

    oh- found out this chinese rear axle has the same exact splines as the honda 200x. (honda 200x) hub on there now (temporary) thought that was interesting.
    ok now that i've typed way to much i have to get back to work.
    stay healthy (all)
    over and out-
    Click image for larger version. 

Name:	450011C4-799C-4BFE-A9DC-EBA45F3A60BD.jpeg 
Views:	7 
Size:	2.92 MB 
ID:	264014 Click image for larger version. 

Name:	667EEF14-6FF3-4E61-8B2F-5AC0757D0051.jpg 
Views:	7 
Size:	2.19 MB 
ID:	264015
    shep

  7. #22
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    Quote Originally Posted by Shep1970 View Post
    jason, i guess i lied about monday
    I've gotta mount 4-tires today, grab a battery tonight, motor spins over nicely by hand (elec start only) Then gas her up tomorrow/ so aiming for mid wk for shells/ sorry.
    welcome to my day
    get this china thing done/
    pouring tri-z rubber throttle cover things/in house-
    my youngest is home taking an on-line drivers ed course, 6 hours per day x 5 days.
    im in the hot sun on the driveway/to hot for mosquitoes though....

    oh- found out this chinese rear axle has the same exact splines as the honda 200x. (honda 200x) hub on there now (temporary) thought that was interesting.
    ok now that i've typed way to much i have to get back to work.
    stay healthy (all)
    over and out-
    Click image for larger version. 

Name:	450011C4-799C-4BFE-A9DC-EBA45F3A60BD.jpeg 
Views:	7 
Size:	2.92 MB 
ID:	264014 Click image for larger version. 

Name:	667EEF14-6FF3-4E61-8B2F-5AC0757D0051.jpg 
Views:	7 
Size:	2.19 MB 
ID:	264015
    shep
    No worries shep, that works for me. Too bad you didn't have some extra 200x 8x8s with some 18x10s laying around, that would look pretty cool, haha.
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

  8. #23
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    1,326
    Jason- i'll set aside the best one for you, i'll trim and drill that one first (this wk-end). I can never seem to put pics in pm's, not sure if its even do-able. i'm assuming putting one here is ok with 3ww
    stay safe.....
    Click image for larger version. 

Name:	5E9F09EC-5AA7-4442-BBE5-BA015C712BE3.jpeg 
Views:	6 
Size:	2.54 MB 
ID:	264209

    shep

  9. #24
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    Quote Originally Posted by Shep1970 View Post
    Jason- i'll set aside the best one for you, i'll trim and drill that one first (this wk-end). I can never seem to put pics in pm's, not sure if its even do-able. i'm assuming putting one here is ok with 3ww
    stay safe.....
    Click image for larger version. 

Name:	5E9F09EC-5AA7-4442-BBE5-BA015C712BE3.jpeg 
Views:	6 
Size:	2.54 MB 
ID:	264209

    shep
    Thanks shep, those look great. Just let me know when you're ready to ship and I'll get you $$ and my address. Have you ever considering making the tank shrouds?
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

  10. #25
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    1,326
    Jason- tank shrouds are available through a member here, he has them listed through ebay. I made a set of tank shroud molds this year "but" there just for personal use.

    shep

  11. #26
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    Quote Originally Posted by Shep1970 View Post
    Jason- tank shrouds are available through a member here, he has them listed through ebay. I made a set of tank shroud molds this year "but" there just for personal use.

    shep
    Ah, I jumped over to Ebay and checked my watch list, that seller name does look familar,
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

  12. #27
    jasong_10's Avatar
    jasong_10 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2020
    Location
    Croghan, New York
    --
    420
    Quote Originally Posted by Shep1970 View Post
    Almost forgot, just wanted to remind you that I'm still interested in a pair of the screw covers/plugs if you've got a set that isn't matched up with a dash.
    Jason

    85 ATC 250R - restored stock other than 18" rears, nerf bars, Honda key switch, 14T front sprocket, and white tank and plastics (except rad shrouds)

    87 ATC 200X - restored stock other than 18" rears and nerf bars

    84 TRX 200 - rough but complete budget restore for wife and eventually daughters to bum around on

    Eton Viper 50cc - oldest daughter's current ride

  13. #28
    camy is offline New to the board Arm chair racerNew to the board
    Join Date
    Sep 2008
    Location
    Quebec, Canada
    --
    45
    Do you still make the seat bushings??
    Tomy ATC- my mother gave it!!!
    1985 ATC 250SX
    1985 ATC 200X
    1985 ATC 200X
    1985 ATC 200X - Bought from Yamada. Resto mod project
    1985 ATC 70 - Full resto... girlfriend's bike
    1984 ATC 70 - In restoration Lifan 120cc in project
    1983 ATC 70 - Full OEM yard beater!!!!
    1983 ATC 70 - Sold to Yamada who sold it
    1979 ATC 70 - Sold to Yamada
    1973 ATC 70 - 125cc ripper to be bring back to stock

    1985 TRI-ZINGER

    1984 ALT50E
    1983 ALT50D

  14. #29
    Join Date
    Aug 2016
    Location
    East of Worcester ma
    --
    1,326
    Yes, i've been running low on a few things the rubber has been hard to get this year, i will check on those this am and PM you my cell# (easier than PM-ing.

    shep

//ArrowChat Integreation Code //